3dfx Archive | |
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
3dfx Section >> 3dfx Drivers >> Creative MiniGL files for Banshees http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1073880787 Message started by Raziel64 on 12.01.04 at 05:13:07 |
Title: Re: Creative MiniGL files for Banshees Post by Boiu_Andrei on 12.01.04 at 10:40:45
The "Creative MiniGL" is the interface that allows the Banshee (and Voodoo2), to display 512x512 textures in Quake3. It passes the texturesize limit of 256x256.
However, expect it to be good only for snapshots, not for playing, as the fps can get get sometimes below 3fps in 1024x768 resolutions... |
Title: Re: Creative MiniGL files for Banshees Post by Boiu_Andrei on 16.01.04 at 09:21:29
There is a big difference in the quality, but frankly, the hack on the Creative MiniGL is by far older...
Actually, every card designed by Creative can use the same drivers as the other cards. The only difference is been done by the checking of some "Vendor" strings, and perhaps a checksum. Otherwise, in real terms, the cards make by Creative are perhaps 5% faster than the rest. But in the case of Banshee the 5% advantage was of the Gigabyte GA-630 card... So not every time, Creative is that important... |
3dfx Archive » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |