3dfx Archive - Installing Raven card using Win 2K. Can it be done

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › 3dfx Drivers › Installing Raven card using Win 2K. Can it be done

(Moderators: NitroX infinity, gdonovan, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1

Installing Raven card using Win 2K. Can it be done (Read 185 times)

tom_heron

YaBB Newbies

Offline

Posts: 4

Installing Raven card using Win 2K. Can it be done
08.04.04 at 07:34:43

Greetings from OZ,

I'm trying to use my 3DFX 'Raven' card (the box says it uses Voodoo Banshee technology) after installing Win2K on my machine, but the PC recognises the card (displays info re the card on boot) but Win2K hangs on starting.

I'd appreciate it if you could tell me if there is a 3rd party driver for the card and how I install the software.

Rgds,
Tom Heron
Melbourne, OZ

IP Logged

Rolo01 Full Member Offline Posts: 191	Re: Installing Raven card using Win 2K. Can it be Reply #1 - 08.04.04 at 19:06:05 I guess you give a try to the drivers of BansheeTeam. You can find them here : http://www.bansheeteam.cjb.net/ They worked fine for me on WinXP.
Back to top	IP Logged

tom_heron YaBB Newbies Offline Posts: 4	Re: Installing Raven card using Win 2K. Can it be Reply #2 - 09.04.04 at 04:17:43 Thanks for the post re the Win2k drivers for the Raven card Rolo, Still have a problem with the machine hanging when booting Win2k with the Raven card installed. Any suggestions anyone? Regards, Tom Heron
Back to top	IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: Installing Raven card using Win 2K. Can it be Reply #3 - 09.04.04 at 10:30:29 By the way, what Hardware are you using (Motherboard, CPU) ?
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

tom_heron

YaBB Newbies

Offline

Posts: 4

Re: Installing Raven card using Win 2K. Can it be
Reply #4 - 13.04.04 at 03:35:07

I'm using a Dell GX110 (Intel 300mhz processor).

The screen displays that the Raven (Voodoo2) PCI card is detected when the machine cold boots, but as the W2k graphic/starting message (& bar graph) displays the machine hangs.

BTW, the Raven card worked perfectly on the machine (W98) until W2k was installed.

Rgds, Tom Heron

IP Logged

Sergio YaBB Newbies Offline Amo a mi Novia, Amo mi V5 y Amo a 3dfx... Posts: 6	Re: Installing Raven card using Win 2K. Can it be Reply #5 - 02.05.04 at 01:19:02 Raven??... This souns like a Quantum 3D Raven Banshee card.... So..... I guess that the Banshee team drivers doesn't work at all in this card..... But.. probalbly I'm wrong......... a system problem relate could be too.... ReGaRdS
Back to top	Piensa Voodoo, come Voodoo, vive Voodoo... 3dfx... Haciendo las reglas y reinando el mundo... IP Logged

tom_heron YaBB Newbies Offline Posts: 4	Re: Installing Raven card using Win 2K. Can it be Reply #6 - 02.05.04 at 12:04:33 Thanks Sergio, Looks like I'll have to get a new card (or retro to Win98). May as well get a new system. The PC's six years old now and the processor's only a 300 mhz Intel and it needs a larger hard drive....... regards, Tom H.
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page