3dfx Archive - Print Page

3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl This & That >> This & That >> friggin' bloody finally.. http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1173271227 Message started by ps47 on 07.03.07 at 13:40:27

Title: friggin' bloody finally..
Post by ps47 on 07.03.07 at 13:40:27

;D

man,I really need to learn how to operate that Canon A530 camera properly.the images could use some improvement..

Title: Re: friggin' bloody finally..
Post by paulpsomiadis on 07.03.07 at 15:35:29

@ps47 - do you also have some REALLY dribbly candles on your desk there? ???

REALLY dribbly candles are kewl! 8)

Title: Re: friggin' bloody finally..
Post by Obi-Wan_Kenobi on 08.03.07 at 22:23:56

@ ps47

nice pics mate and congratulations for the Rev.A 3700 !

Since this is a 3dfx related topic it would be wiser to post it here:
http://www.falconfly-central.de/cgi-bin/yabb/YaBB.pl?board=general

no problems with it now but the This and That area is a place for non 3dfx related subjects ;)

Title: Re: friggin' bloody finally..
Post by ps47 on 18.11.07 at 20:49:47

finally I was able to give her a spin:

runs like butter (glide2x seems a bit problematic,I had to use the glide2xto3x wrapper to avoid lockup on exit,but I blame that on xp) ;D

however,C694 seems to be missing on my board (the card had to be like that when I got it,there is no way I could tear it down by accident without realizing it,only had it out from the original wrappings 3-4 times,only to have a look at it+the yesterdays test,and there is no way I could do such damage only by gently plugging the card into the agp slot of the 8ks5a board):

so it seems like the c694 should be there-can someone confirm this?

Title: Re: friggin' bloody finally..
Post by Eye-Q on 18.11.07 at 21:38:53

Yes, the C694 is present on my card, but if the card runs smooth without any errors that might be a part which isn't really necessary.

Title: Re: friggin' bloody finally..
Post by ps47 on 18.11.07 at 21:43:57

seems like I better find a replacement and have it re-soldered back.C694 part is not present on any of the cards I have though,lets hope someone will be able to give me more detailed info on the part..

any chance you could get up a picture of yours?

Title: Re: friggin' bloody finally..
Post by exxe on 21.11.07 at 17:57:21

http://www.abload.de/img/img_5975-bq8a.jpg

Title: Re: friggin' bloody finally..
Post by hanksemenec on 21.11.07 at 23:24:47

C 694 = .1uF 16V 10% ceramic cap X7R 0603 size

Title: Re: friggin' bloody finally..
Post by ps47 on 22.11.07 at 05:43:31

perfect.any idea if I could salvage one from,lets say,dead voodoo5 5500?

thank you..

Title: Re: friggin' bloody finally..
Post by gdonovan on 22.11.07 at 13:00:57

wrote on 22.11.07 at 05:43:31:

perfect.any idea if I could salvage one from,lets say,dead voodoo5 5500?

thank you..

I'll look, I might have one.

Title: Re: friggin' bloody finally..
Post by paulpsomiadis on 22.11.07 at 21:12:42

I have a DEAD V5500 and will gladly salvage and ship the part.

@Hank - which capacitors on the V5500 AGP are of the same value?