3dfx Archive
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl
This & That >> Marketplace >> [T] Voodoo 4500 PCI for AGP
http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1425006418

Message started by RaptorZX3 on 27.02.15 at 04:06:58

Title: [T] Voodoo 4500 PCI for AGP
Post by RaptorZX3 on 27.02.15 at 04:06:58
I have a fully-working Voodoo 4500 PCI ("3DFX fan" on it), i would trade for the AGP version of the same card.

Great for motherboards without AGP or Mac computers of this era!

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by hard1k on 02.03.15 at 11:32:02
Hi!
I have a V4 4500 AGP for trade. Located in Russia, Moscow. PM me if you're interested.

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by hard1k on 13.03.15 at 08:59:21
V4 4500 AGP shipped.

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by RaptorZX3 on 13.03.15 at 10:01:20
thank you, i'll be waiting for it. If you did put the card in a reusable box, i'll put mine in and send the box back to you.

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by hard1k on 23.05.15 at 14:45:42
V4 4500 PCI received in beautiful condition, many thanks!

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by RaptorZX3 on 23.05.15 at 16:04:25
thanks for the trade! :)

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by Kokohemmo on 23.05.15 at 22:44:48
Hi

Nice catch hard1k

PCI version of Voodoo4 4500 is much harder to get than AGP.  ;)

Regards
Kokohemmo

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by RaptorZX3 on 24.05.15 at 13:59:32
oh i knew that about the PCI.

But i paid like 20-25$ for it from a guy on the North Shore of Montreal. Tested it, and it went in my "3DFX box", i didn't really wanted to use it because i wanted an AGP version of this card.

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by hard1k on 26.05.15 at 10:29:16
Kokohemmo
Yeah, thanks! I appreciate the deal too.
Now it's time to think where I can use this card, but the range of options for a PCI version is much wider, that's for sure.

Title: Re: [T] Voodoo 4500 PCI for AGP
Post by RaptorZX3 on 26.05.15 at 16:19:25
the best thing is to use it on a Mac. Because i fail to think about the best use for it...

1- Using it on a PCI-only Pentium 3 board? (you can easily find an AGP board nowadays)
2- Using it for DOS games? (it's so useless AND not even compatible with UniVESA driver)
3- Using it on a Pentium 1 or 2? (waste of performance)

So yeah, your best bet is to use it on a Mac G3, G4 or something.

But it's a nice collector piece as well.

On the other side, i'm more of a PC gamer, so AGP is the best for performance in video cards of this era, so this is why i wanted the AGP version.

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.