Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › General Section › General Discussion › Banshee Video Problems
(Moderators: gdonovan, FalconFly, NitroX infinity)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
Banshee Video Problems (Read 77 times)
Kiwi
YaBB Newbies
*
Offline



Posts: 1
Banshee Video Problems
08.08.03 at 04:56:09  
I just bought a second-hand Banshee AGP card to upgrade my old PII 333.  Some technical details:

Dell Dimension XPS D333 (Pentium II)
Motherboard: Intel AL440LX

When I boot up after installing the card I get one long and two short system beeps and the computer locks up.  Can anyone tell me what this means?  Card slipped into slot very easily so don't think that is the problem.  Most likely card not compatible with hardware?????

Someone please help............
Back to top
 
 
IP Logged
 
Rolo01
Full Member
***
Offline



Posts: 191
Re: Banshee Video Problems
Reply #1 - 08.08.03 at 09:52:11  
I had the same problem when I tried to use a banshee AGP in my i815EP Board with a pentium 3.
You have to flash the banshee bios to the latest version.
Get the bios here :
http://welcome.to/3dfxbios
But be carefull to pick the right one for your card, SDRam or SGRam.
If you have questions, mail me at Rolo01@gmx.de
Back to top
 
...
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge