3dfx Archive - Voodoo2 limit texture memory utility?

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › 3dfx Drivers › Voodoo2 limit texture memory utility?

(Moderators: NitroX infinity, FalconFly, gdonovan)

‹ Previous Topic | Next Topic ›

Pages: 1

Voodoo2 limit texture memory utility? (Read 174 times)

us185damiani YaBB Newbies Offline I love YaBB 1G - SP1! Posts: 3	Voodoo2 limit texture memory utility? 05.07.05 at 04:46:53 where can I get the original utilities that came with the V2 1000? the hub utility which allows you to limit texture memory? I have installed the V2 drivers for athalon, but don't have the tweak utility. thanks Mike
Back to top	IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: Voodoo2 limit texture memory utility? Reply #1 - 05.07.05 at 09:43:31 http://www.falconfly.de/tools.htm If the Athlon Driver has the Tweak in its .inf File, it should be usable without Problems.
Back to top	« Last Edit: 05.07.05 at 09:44:22 by FalconFly » WebMaster FalconFly Central 3dfx Archive IP Logged

us185damiani YaBB Newbies Offline I love YaBB 1G - SP1! Posts: 3	Re: Voodoo2 limit texture memory utility? Reply #2 - 05.07.05 at 14:19:29 Thanks for the help sir, my question is, how do I run the utility? where can I access it? I installed it but don't know where to access the program. thanks (it's been awhile since I've run a V2. thanks Mike
Back to top	IP Logged

FalconFly

YaBB Administrator

Offline

3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male

Re: Voodoo2 limit texture memory utility?
Reply #3 - 05.07.05 at 19:35:38

As seen in the ReadMe file :

=======================================================================
Installation
=======================================================================

1) Install the latest 3Dfx Voodoo2 reference drivers if they haven't
already been installed.

2) Copy or extract the 3DfxV2ps.dll file included with this distribution
into your Windows 95/98 system directory (normally C:\Windows\System),
replacing the existing version.

Step 2 should work fine alone, since you already got a good Driver installed.
After that, the Control Panel should show up in the Display Properties and offer the additional 3dfx Tabs with the advanced Options.
Alternatively, you should be able to access it from the Windows > Settings > System Controls via Start Menu as well.

In short, the Voodoo2 Control Planel is just a .cpl File
going in your Windows\System Folder, that's it. Its 3dfx Icon should appear among the other Control Applets after you copy it there (if not, refresh Window with F5 should reload all Applets)

« Last Edit: 05.07.05 at 19:37:48 by FalconFly »

WebMaster FalconFly Central 3dfx Archive

IP Logged

us185damiani YaBB Newbies Offline I love YaBB 1G - SP1! Posts: 3	Re: Voodoo2 limit texture memory utility? Reply #4 - 05.07.05 at 23:17:16 Thanks for the help, it finally showed up after I properly read the Athalon V2 install instructions LOL then I was able to run it and make the necessary adjustments. I'm waiting for my 2nd V2 1000 so I can run 2 in SLI should be a nice set up for RB 3D thanks
Back to top	IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: Voodoo2 limit texture memory utility? Reply #5 - 05.07.05 at 23:58:50 Good luck with SLI - be sure that both cards are the same brand Voodoo 2 just to avoid problems! You can use different cards, but it would involve hacked drivers... If SLI works fine for you 1st time - GREAT, 'cos it kicks A$$! 8) ...if not, get back on the forum and we'll sort you out!
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page