3dfx Archive - Re: V2 Creative 3D Blaster or Diamond Monster 3D I

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › General Section › General Discussion › Re: V2 Creative 3D Blaster or Diamond Monster 3D I

(Moderators: NitroX infinity, FalconFly, gdonovan)

‹ Previous Topic | Next Topic ›

Pages: 1

Re: V2 Creative 3D Blaster or Diamond Monster 3D I (Read 119 times)

mikulaish Full Member Offline Just a chemist... Posts: 120	Re: V2 Creative 3D Blaster or Diamond Monster 3D I 24.02.06 at 10:24:42 I used Creative V2 and I can say that it is almost 10% faster than a Powercolor V2, and it even worked in SLI with the Powercolor. I don't know about the Diamond, but Creative V2 is definitely a good choice. Regards. Alpar
Back to top	IP Logged

plank YaBB Newbies Offline Posts: 13 Queensland, Australia Gender:	Re: V2 Creative 3D Blaster or Diamond Monster 3D I Reply #1 - 24.02.06 at 12:56:35 Wow, it worked in SLI with a Powercolor?. I've got the option of buying 2 12mb Powercolors as well, but I can't find any drivers for them on the internet. Would generic drivers work?
Back to top	« Last Edit: 24.02.06 at 13:04:51 by plank » IP Logged

mikulaish Full Member Offline Just a chemist... Posts: 120	Re: V2 Creative 3D Blaster or Diamond Monster 3D I Reply #2 - 24.02.06 at 13:55:09 Ofcourse! Just use the drivers from 3dfxzone.it. (i personally like Fastvoodoo 3.5) They work with any V2, so do any other V2 drivers. You can use any V2 driver that you like. I repeat: if you are looking for performance, do not go for the Powercolor V2.
Back to top	IP Logged

plank YaBB Newbies Offline Posts: 13 Queensland, Australia Gender:	Re: V2 Creative 3D Blaster or Diamond Monster 3D I Reply #3 - 24.02.06 at 14:25:38 Hmm, interesting. I think I might just buy the Creative AND the Diamond, then SLI then and just use the FastVoodoo drivers. It's my understanding that the only reason reference designs from different manufacturers didn't work was because of driver differences, is this correct?
Back to top	IP Logged

mikulaish

Full Member

Offline

Just a chemist...

Posts: 120

Re: V2 Creative 3D Blaster or Diamond Monster 3D I
Reply #4 - 24.02.06 at 14:41:13

Not correct. If you use two types of V2's, that doesn't mean that you use different drivers. Reference drivers only support mached SLI (meaning that the cards must be the same). Newer 3rd party drivers support missmatched SLI, so you can use different V2's in SLI. If you are looking for SLI, than you really should start with two identical cards.

« Last Edit: 24.02.06 at 14:41:27 by mikulaish »

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page