Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › 3dfx Section › Tech Talk › Can you help identify this Voodoo 2 ?
(Moderators: NitroX infinity, FalconFly, gdonovan)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
Can you help identify this Voodoo 2 ? (Read 190 times)
endo
YaBB Newbies
*
Offline


VoodooII Forever!

Posts: 34
Sydney, Australia
Gender: male
Can you help identify this Voodoo 2 ?
27.07.09 at 10:21:14  
Hi,

I recently purchased a Voodoo 2 card from a private website, the owner said it was from a Gateway 2000 PC.

I have had a look at it and it appears to be 12MB, this is unusual for me as I haven't seen cards like this with no memory on the back.

Anyway I did a little poking around and it appears the passthrough cable appears to be original, also the main identifying number I can see is: 600-0027-02B which the only thing that comes close to it is a Hercules Stingray Voodoo2, but after looking at that card it is significantly different.

Do you know what this is ?

Thanks for your time.

-endo.

... ...
Back to top
« Last Edit: 27.07.09 at 12:23:21 by endo »  
 
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: Can you help identify this Voodoo 2 ?
Reply #1 - 27.07.09 at 11:47:38  
600-0027-02B is a generic number which, if I'm not mistaking, identifies the PCB layout, not the brand or model. I have several V2's with this number but all from different brands.

In other words, we can't say anything untill we've got pictures.
Back to top
 
WWW  
IP Logged
 
endo
YaBB Newbies
*
Offline


VoodooII Forever!

Posts: 34
Sydney, Australia
Gender: male
Re: Can you help identify this Voodoo 2 ?
Reply #2 - 27.07.09 at 12:25:52  
NitroX infinity wrote on 27.07.09 at 11:47:38:
600-0027-02B is a generic number which, if I'm not mistaking, identifies the PCB layout, not the brand or model. I have several V2's with this number but all from different brands.

In other words, we can't say anything untill we've got pictures.


Hi NitroX infinity

Thanks for helping me out! Im sure you will know what this is as soon as you see it with your great knowledge  Smiley

Ive put up a couple of pictures, the back of the card is a bit dark but there is nothing really interesting on there anyway >.>

-endo.
Back to top
« Last Edit: 27.07.09 at 12:26:35 by endo »  
 
IP Logged
 
RaverX
God Member
*****
Offline


Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male
Re: Can you help identify this Voodoo 2 ?
Reply #3 - 27.07.09 at 16:55:12  
It's a Powercolor, there were a lot of those boards made, especially in 1999 and 2000 and I'm guessing that system manufacturers choose them, because they were quite cheap.
Back to top
 
 
IP Logged
 
endo
YaBB Newbies
*
Offline


VoodooII Forever!

Posts: 34
Sydney, Australia
Gender: male
Re: Can you help identify this Voodoo 2 ?
Reply #4 - 28.07.09 at 03:45:45  
RaverX wrote on 27.07.09 at 16:55:12:
It's a Powercolor, there were a lot of those boards made, especially in 1999 and 2000 and I'm guessing that system manufacturers choose them, because they were quite cheap.



Hi RaverX,

Thank you for letting me know, I should have looked a bit harder before I asked but if you look at:

http://www.tdfx.de/eng/evilking.shtml

You can see it's simarlily like it, except this card is a 2.0 and that one is a 2.1, same sticker on the back etc.

-endo.
Back to top
« Last Edit: 28.07.09 at 03:53:16 by endo »  
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge