Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
3dfx in a midway arcade system (Read 162 times)
jandarsun8
God Member
*****
Offline



Posts: 712
Minneapolis, MN
Gender: male
3dfx in a midway arcade system
02.03.06 at 09:24:18
 
Well was looking at some links on an old Kyro forum and came across this link. Thought it was kind of cool and give some of you guys something else to try and get.  Grin  Anyway, here's the link. You have to scroll all the way up to the top to see the board and specs on it but here they are in a nut shell.

Main CPU : MIPS R5000 @ Either 144MHz/150MHz/192MHz/200MHz (system clock 48MHz/50MHz)
System Memory : 8MB, 512KB Boot ROM.
Graphics : 3DFX FBI with 2MB frame buffer, 3DFX TMU with 4MB texture memory.
Sound CPU : DCS Sound System (ADSP 2115 @ 16MHz)
Sound Memory : 4MB DRAM, 32KB Boot ROM.
Other Chips : Galileo GT64010 system controller, National Semiconductor PC87415 IDE controller, Midway I/O ASIC.
Board composition : Main PCB and Hard Drive.
Hardware Features : Textured 3D, all normal 3DFX features.


http://www.system16.com/hardware.php?id=618&gid=1149#1149

Back to top
 
Dallizzt2004  
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: 3dfx in a midway arcade system
Reply #1 - 02.03.06 at 12:26:10
 
Back to top
 

Rampage is alive!
 
IP Logged
 
jandarsun8
God Member
*****
Offline



Posts: 712
Minneapolis, MN
Gender: male
Re: 3dfx in a midway arcade system
Reply #2 - 04.03.06 at 05:25:37
 
LOL ok, I was a little slow on posting this apparently by a couple of years.   Grin  Thanks for the link man, much better reading.
Back to top
 
Dallizzt2004  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print