Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 
Send Topic Print
Hello folks, (Read 760 times)
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Hello folks,
29.10.11 at 13:21:20
 
hello to all,

i am new here but with this forum connected me searching on "old" hardware and testing them. i used already a lot informations from your site and it is realy nice to find one where all facts and informations are professinaly presented. the reason to publish in forum is that i received one voodoo card which i cant identify in your hardware list. the fcc id of the cards icuvga-gw803 pn is 9803-00. as per your id list sopouse to be one gainward card but the rest not match. as per seller information should be voodoo2 with 8mb vram. can u help me to sort this card? if is a photo needed i should load one additionaly.
thank u very much for your help and time invested in advance.
Back to top
« Last Edit: 29.10.11 at 13:22:17 by Barisan »  
barisanx  
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: Hello folks,
Reply #1 - 29.10.11 at 13:25:27
 
It's a Gainward Voodoo2.
Back to top
 
WWW  
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #2 - 29.10.11 at 14:07:15
 
thx for quick ewply. i have allready two icuvga-gw803n but the internal 2d connectors want delivered with cards. could be possible to find them somwhere, or another formed - can somebody sell me one so i can use them in sli. my intention is to build one retro pc with the voodoos inside. here the basich informations about pc:

mainboard - asus
CPU - 2xPIII 1000MHz slot1
ram - maximum supported

on the hardware should not break... i have about 800CPU's, 140 GC and 50 mainboards from different stages of computer evolution. oldest running system is one 80286 Smiley my first pc.

all proposals about project and system configurations are welcome.

thx in advance
Back to top
 
barisanx  
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Hello folks,
Reply #3 - 30.10.11 at 06:56:23
 
nice hardware colection mate !
Can you post some pictures with it ?
Wink
Back to top
 
WWW m14radu  
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #4 - 30.10.11 at 14:05:39
 
Hi,

no prob... but how can I upload pcs from my rig...
Undecided
Back to top
 
barisanx  
IP Logged
 
Quaker763
Junior Member
**
Offline


It really is kind of ridiculous

Posts: 67
Australia
Gender: male
Re: Hello folks,
Reply #5 - 31.10.11 at 01:51:11
 
Barisan wrote on 30.10.11 at 14:05:39:
Hi,

no prob... but how can I upload pcs from my rig...
Undecided


After you have taken the pics, upload to a site like ImageShack, then use the insert image (top left, third button) get the link then copy inside the parameters.
Cant wait to see the pics Cheesy
Back to top
 
 
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #6 - 31.10.11 at 11:06:19
 
Hi,

so, here arew a few pics which show a perfecr controled chaos... the pic with gc only should follow
...
mainboards part II & gc
...
my old single stage and parts corner, under the desk - mainboards & gc
...
my first nachine 80286  Smiley
...
a part of my CPU collection, in the roll container bellow is one tray full with AMD so 462 chips, in second container is one tray only for so 370

that is just one part of hardware i collected. i have to get a bit order in the chaos and test about 30 new gc. afther that follws the pic with all gc, sorry guys if i dissapointed u with this chaos galery
Back to top
 
barisanx  
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #7 - 31.10.11 at 16:56:46
 
Cry one of capacitors on my voodoo3 3000 is dead (brooken)... the guy sent me the card in envelope rolled in newspaper.. Cry
Back to top
 
barisanx  
IP Logged
 
OutOfRange
Senior Member
****
Offline



Posts: 348
Switzerland
Gender: male
Re: Hello folks,
Reply #8 - 04.11.11 at 20:32:53
 
As long as the soldering points on the card are intact, it's no problem to just solder the cap or an equal replacement back in place and have some fun with the card  Wink
Back to top
 
WWW  
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #9 - 05.11.11 at 13:45:56
 
good afternoon gents,

I am playing now with one Elsa Victory II with Banshee chip.  I use Raziel64' s Evolution XP Driver and testing the card with 3DMARK 2001 SE. Later i should try to run other 3DMARK benchmarks to see where is the red line in freq. I have only one small prob, I do not get the card specs displayed with GPUZ. Any idea to solve this? I should post later the results of benchmarks.
Thx in advance
Back to top
 
barisanx  
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #10 - 25.11.11 at 20:01:36
 
Hello,
I have two cards which seems to be out of order. I am not quite a specialist in electronics (absolute antitalent for solder iron or simmilar) and I do not want to throw the cards. Following cards are my problem kids:

A-Trend Helios 3D ATC-2475
Hercules Stingray single planar

The cards do not have video signal, voltage measurment show that the electric tension is there and gpu's are warm after few minutes. Maybe is the problem in the BIOS maybe is one of the elements dead, no clue. Could somebody help in this matter and maybe repair them?
Thx in advance for your feedback and time spend.

regards

p.s.
everest recognized alliance chip on both cards
Back to top
« Last Edit: 26.11.11 at 16:11:30 by Barisan »  
barisanx  
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #11 - 07.12.11 at 00:00:45
 
Ihave two Voodoo2 12Mb cards which are not listed in database. I found following data on PCB:

on PCB - 392-0455-A00R10
on sticker - AA2455ACAHK020 86G 02134

VRAM chips used on this caard are EliteMT-25J 9821S M11B416256A M3Z55-UA

I think this cards are produced by InnoVision but I am not sure if this is correct.

Thx in advance
Back to top
 
barisanx  
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: Hello folks,
Reply #12 - 07.12.11 at 00:26:21
 
392-0455-A00R10 is A-Trend Technology Corporation (ATC).

I wonder what the difference is between this one (A00R10) and B00R20?

* 392-0455-B00R20 is what all my ATC cards have printed on them (both ATC cards and resellers).
Back to top
« Last Edit: 07.12.11 at 00:28:32 by NitroX infinity »  
WWW  
IP Logged
 
Barisan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 34
Germany
Gender: male
Re: Hello folks,
Reply #13 - 07.12.11 at 00:32:13
 
I should post the pich of the front and back of the cards in about 20 mins..

was abit longer, coz my cam cant more... pics done with webcam.
Here is link to my profile by HWBOT: http://www.hwbot.org/user/barisan/

and here the ugly face behind
...
a bit of humor is healty.... Wink
...
...
...
...
...
...
Back to top
« Last Edit: 07.12.11 at 03:12:09 by Barisan »  
barisanx  
IP Logged
 
goriath
God Member
*****
Offline


Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male
Re: Hello folks,
Reply #14 - 07.12.11 at 15:02:56
 
Cool thoughtful look you had Wink
Back to top
« Last Edit: 07.12.11 at 15:03:09 by goriath »  

...
OLD SCHOOL: Because it was done right the first time
 
IP Logged
 
Pages: 1 2 
Send Topic Print