3dfx Archive - Voodoo Rush mod from 6Mb to 8Mb

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › General Section › General Discussion › Voodoo Rush mod from 6Mb to 8Mb - bigger is better

(Moderators: gdonovan, NitroX infinity, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1

Voodoo Rush mod from 6Mb to 8Mb - bigger is better (Read 455 times)

Komponent

Senior Member

Offline

3dfx modder

Posts: 282

Voodoo Rush mod from 6Mb to 8Mb - bigger is better
14.04.13 at 16:44:09

Starting with one Yakumo Voodoo Rush, 6Mb of 4Mb FBI + 2Mb TMU, I got 926 points in 3DMark99Max.

Soldered piggyback style 4 chips of 512Kb for the TMU except for RAS pin, identified the command pin on the TMU chip (reverse engeneering as there is no databook available) and connected them with wire and resistor.
The card works perfectly using the extra RAM, with more than 100 extra 3DMark points.

Fun and easy job for a weekend day...

« Last Edit: 20.04.13 at 21:23:21 by Komponent »

IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better Reply #1 - 14.04.13 at 17:30:15 Awesome job
Back to top	IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better Reply #2 - 14.04.13 at 19:39:15 Shame you didn't do a before / after texture quality comparison for games... I'd bet it would be sharper now!
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

exxe God Member Offline ^^ Posts: 1316 germany	Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better Reply #3 - 15.04.13 at 23:04:07 nice can you also build a 8MB TMU Memory 2themax/ Gainward/ Cardexpert rush? http://tdfx.de/pic/dragon2000_01.JPG
Back to top	IP Logged

ps47 God Member Offline Keeper of the 3Dfx Helppage Posts: 988 Slovakia,central Europe Gender:	Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better Reply #4 - 15.04.13 at 23:24:46 nice indeed. would it be possible to do something similar with a v2, I wonder? maybe 4MB for the fbi and 8MB for each tmu?
Back to top	« Last Edit: 11.09.16 at 09:56:22 by ps47 » 3Dfx Help Page / 3Dfx Game Guide IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better Reply #5 - 15.04.13 at 23:29:37 FBI's on Voodoo2's already have 4MiB. Would be nice if they had 8MiB.
Back to top	My Blog IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better Reply #6 - 16.04.13 at 09:51:10 Amazing work Komponent!
Back to top	IP Logged

Komponent

Senior Member

Offline

3dfx modder

Posts: 282

Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better
Reply #7 - 16.04.13 at 17:00:00

@all: Thanks for the props Wink

@paulpsomiadis: I did not pay much attention, but I did not notice any clear difference in quality.
@exxe: Can't say for sure, but I do have something different in mind; maybe someday I'll try it.
@ps47: Something similar for V2, I doubt. Though I plan to test another angle in due time, when I'll have some funds.

IP Logged

Komponent Senior Member Offline 3dfx modder Posts: 282	Re: Voodoo Rush mod from 6Mb to 8Mb - bigger is better Reply #8 - 22.04.13 at 16:13:29 DIY guide: Stack RAM chips ontop those 4 allocated to the TMU and solder each pin to the same below except pin 14. Connect pin 14 on all 4 piggybacked modules to pin 130 of the TMU through a 22-47 ohm resistor. I only had at hand 100 ohm ones and used those and had no problem.
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page