3dfx Archive - 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #300 - 17.12.13 at 12:34:47 To have a good set up motherboard for the rampy in the bios what can i change:
Back to top	« Last Edit: 17.12.13 at 12:35:01 by trevormacro » IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #301 - 17.12.13 at 14:35:51 Since Rampage cant handle memory texture. Set it as AGP1x - Aperture 4/ or 8/ or 16 or 32Mb. The min. as possible. - Memory Cache disabled. - AGP4x 1x Mode. Oscar.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #302 - 17.12.13 at 15:13:27 osckhar wrote on 17.12.13 at 14:35:51: Since Rampage cant handle memory texture. Set it as AGP1x - Aperture 4/ or 8/ or 16 or 32Mb. The min. as possible. - Memory Cache disabled. - AGP4x 1x Mode. Oscar. thanks for these tips. what about AGP FastWrite override and Enable memory gap?
Back to top	IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #303 - 17.12.13 at 15:16:08 All disabled.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

gdonovan

YaBB Administrator

Offline

Infernal Collector

Posts: 2361

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #304 - 17.12.13 at 15:29:37

osckhar wrote on 17.12.13 at 14:35:51:

Since Rampage cant handle memory texture. Set it as AGP1x

- Aperture 4/ or 8/ or 16 or 32Mb. The min. as possible.
- Memory Cache disabled.
- AGP4x 1x Mode.

Oscar.

I have found the card most stable with the smallest aperture possible, my VA6 goes down to 4mb. It makes a huge difference in crashes, the smaller the better.

Back to top

Rampage is alive!

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #305 - 18.12.13 at 19:05:37

here is the ddr i use for my tyan k7x pro is it good or not? perhaps it's my ddr not compatible?

DDR 400 MHz PC3200 184 pins:

http://img11.hostingpics.net/pics/24617820131218007.jpg

nb. perhaps it can crash my system like blue screen fatal error?

look the tyan website: http://www.tyan.com/archive/support/html/memory_s2469.html

nb2. or perhaps i need to put only one cpu amd 2800+? it can cause a fatal error or not?

nb3. about all the bios: http://www.tyan.com/archive/support/html/b_s2469.html

I have found this website for fatal error:

http://www.computerhope.com/issues/ch000223.htm

0D: General Protection Fault

anyone can help me please?

Back to top

« Last Edit: 18.12.13 at 22:29:44 by trevormacro »

IP Logged

osckhar

God Member

Offline

www.3Dfx.es

Posts: 812
SPAIN
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #306 - 18.12.13 at 23:03:35

Dont be nervous there.

First what you must know if BSODs refers VXD.dll library or NOT.

If BSODs makes reference all the time to VXD library, it is normal, driver is still in beta phase. If BSODs makes reference NOT VXD library, then it means you have some problem in your pc, incompatibility HW, memory, general drivers if you installed something, so on...

If your problem refers second one, then I recommend you to use another system or disabled the second CPU AMD.

- Oscar.

Back to top

3Dfx Site - Museo 3Dfx - 3Dfx Collection.&&

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #307 - 18.12.13 at 23:06:56

osckhar wrote on 18.12.13 at 23:03:35:

Dont be nervous there.

First what you must know if BSODs refers VXD.dll library or NOT.

If BSODs makes reference all the time to VXD library, it is normal, driver is still in beta phase. If BSODs makes reference NOT VXD library, then it means you have some problem in your pc, incompatibility HW, memory, general drivers if you installed something, so on...

If your problem refers second one, then I recommend you to use another system or disabled the second CPU AMD.

- Oscar.

It's not a VXD fatal error.
Just 0D fatal error.
I have my MSI 848P Neo-V perhaps i need to test with this mb and it will be better.
Did you use some thermal grease on the chip or never?
If my DDR has more frequency than accepted by motherboard, do you think it's bad? (2,6V 400 MHz Non ECC Kingston I have compared to 2,5V max 266 MHz ECC of the MB ref.)

Back to top

« Last Edit: 18.12.13 at 23:14:45 by trevormacro »

IP Logged

osckhar

God Member

Offline

www.3Dfx.es

Posts: 812
SPAIN
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #308 - 18.12.13 at 23:26:19

Quote:

It's not a VXD fatal error.

Good new. It means you have a problem there with your PC.

Quote:

I have my MSI 848P Neo-V perhaps i need to test with this mb and it will be better.

It is time you test it if your motherboard is compatible with 1.5/3.3V_AGP.

Quote:

Did you use some thermal grease on the chip or never?

Nope, I dont like the idea and I will never do it. Rampage chip runs very cold here.

Quote:

If my DDR has more frequency than accepted by motherboard, do you think it's bad? (2,6V 400 MHz Non ECC Kingston I have compared to 2,5V max 266 MHz ECC of the MB ref.)

Inverse would be a problem but if your memory can run high frequency. Memory is ready to work to low frequency.

My recommendation is you test another platform.

-Oscar.

Back to top

3Dfx Site - Museo 3Dfx - 3Dfx Collection.&&

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #309 - 18.12.13 at 23:34:33

osckhar wrote on 18.12.13 at 23:26:19:

Quote:

It's not a VXD fatal error.

Good new. It means you have a problem there with your PC.

Quote:

I have my MSI 848P Neo-V perhaps i need to test with this mb and it will be better.

It is time you test it if your motherboard is compatible with 1.5/3.3V_AGP.

Quote:

Did you use some thermal grease on the chip or never?

Nope, I dont like the idea and I will never do it. Rampage chip runs very cold here.

Quote:

If my DDR has more frequency than accepted by motherboard, do you think it's bad? (2,6V 400 MHz Non ECC Kingston I have compared to 2,5V max 266 MHz ECC of the MB ref.)

Inverse would be a problem but if your memory can run high frequency. Memory is ready to work to low frequency.

My recommendation is you test another platform.

-Oscar.

My MSI MB official spec (taken here : http://www.msi.com/product/mb/848P-Neo-V.html#/?div=Detail)

One AGP slot supports 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V (3.3V not supported).

Is it good?

Back to top

« Last Edit: 18.12.13 at 23:35:07 by trevormacro »

IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #310 - 18.12.13 at 23:39:02 Yupe, it is compatible.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #311 - 18.12.13 at 23:41:40 osckhar wrote on 18.12.13 at 23:39:02: Yupe, it is compatible. Well compatible and stable are two different things.
Back to top	Rampage is alive! IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #312 - 18.12.13 at 23:43:48 gdonovan wrote on 18.12.13 at 23:41:40: osckhar wrote on 18.12.13 at 23:39:02: Yupe, it is compatible. Well compatible and stable are two different things. I will try and let you know if it's stable.
Back to top	IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700 Reply #313 - 18.12.13 at 23:48:28 gdonovan wrote on 18.12.13 at 23:41:40: osckhar wrote on 18.12.13 at 23:39:02: Yupe, it is compatible. Well compatible and stable are two different things. Totally agree. Just test it and you will have other reference for comparing with your TYAN motherboard. - Oscar.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Specter 1000 AGP TEST SOCKET Rev.A1 4700
Reply #314 - 20.12.13 at 09:35:53

Installing Win98SE on my MSI mb:

http://img15.hostingpics.net/pics/81526120131219003.jpg
http://img15.hostingpics.net/pics/78437520131219004.jpg

DirectX 9:

http://img15.hostingpics.net/pics/55261420131219007.jpg

I set hardware acceleration to off in safe mode but when i am in normal windows mode and i put full hardware acc. and i reboot i get this freeze screen and i can't go to windows desktop why?

http://img4.hostingpics.net/pics/25795320131219008.jpg

oscar do you have a solution for me?

when i have installed the drivers i have chosen agp 2000 is it good? the first one. others choices are 3000, 3500 etc.

Back to top

« Last Edit: 20.12.13 at 10:43:25 by trevormacro »

IP Logged

	Welcome, Guest. Please Login