hello to all,

i am new here but with this forum connected me searching on "old" hardware and testing them. i used already a lot informations from your site and it is realy nice to find one where all facts and informations are professinaly presented. the reason to publish in forum is that i received one voodoo card which i cant identify in your hardware list. the fcc id of the cards icuvga-gw803 pn is 9803-00. as per your id list sopouse to be one gainward card but the rest not match. as per seller information should be voodoo2 with 8mb vram. can u help me to sort this card? if is a photo needed i should load one additionaly.
thank u very much for your help and time invested in advance.

thx for quick ewply. i have allready two icuvga-gw803n but the internal 2d connectors want delivered with cards. could be possible to find them somwhere, or another formed - can somebody sell me one so i can use them in sli. my intention is to build one retro pc with the voodoos inside. here the basich informations about pc:

mainboard - asus
CPU - 2xPIII 1000MHz slot1
ram - maximum supported

on the hardware should not break... i have about 800CPU's, 140 GC and 50 mainboards from different stages of computer evolution. oldest running system is one 80286 my first pc.

all proposals about project and system configurations are welcome.

thx in advance

Hi,

no prob... but how can I upload pcs from my rig...

Hi,

so, here arew a few pics which show a perfecr controled chaos... the pic with gc only should follow

mainboards part II & gc

my old single stage and parts corner, under the desk - mainboards & gc

my first nachine 80286 

a part of my CPU collection, in the roll container bellow is one tray full with AMD so 462 chips, in second container is one tray only for so 370

that is just one part of hardware i collected. i have to get a bit order in the chaos and test about 30 new gc. afther that follws the pic with all gc, sorry guys if i dissapointed u with this chaos galery

As long as the soldering points on the card are intact, it's no problem to just solder the cap or an equal replacement back in place and have some fun with the card 

Hello,
I have two cards which seems to be out of order. I am not quite a specialist in electronics (absolute antitalent for solder iron or simmilar) and I do not want to throw the cards. Following cards are my problem kids:

A-Trend Helios 3D ATC-2475
Hercules Stingray single planar

The cards do not have video signal, voltage measurment show that the electric tension is there and gpu's are warm after few minutes. Maybe is the problem in the BIOS maybe is one of the elements dead, no clue. Could somebody help in this matter and maybe repair them?
Thx in advance for your feedback and time spend.

regards

p.s.
everest recognized alliance chip on both cards

392-0455-A00R10 is A-Trend Technology Corporation (ATC).

I wonder what the difference is between this one (A00R10) and B00R20?

* 392-0455-B00R20 is what all my ATC cards have printed on them (both ATC cards and resellers).

Cool thoughtful look you had