3dfx Archive - 3dfx Voodoo5 6000 Peltier Watercooling 2nd

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #30 - 04.01.13 at 17:27:30

Test is done.
Card is not connected to the PC.

With 2 pieces 92mm for fans:

Half hour, my card is 12°C cold behind the GPU. Watertemperature 56°C. Roomtemp 24°C.
I need a very good radiator.

If I had 30°C watertemp, the card reach aprox. -14°C cold.
I need minimum a 480mm radiator to reach this temperature.

What do you think?

What is the VSA-100 temp in action? min temp and max temp for you?

Soon there is the test with my 3 DELTA fans 120 mm.
Any idea about the max frequency with my fans?

Thanks in advance.

Back to top

« Last Edit: 04.01.13 at 17:30:11 by trevormacro »

IP Logged

Kokohemmo

YaBB Newbies

Offline

Posts: 47

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #31 - 05.01.13 at 02:26:53

Hi

First off all, awesome hardware you have made.

In my opinion, you do not need any peltiers behind the card.
It will be in frost ice anyway in behind just with front side peltiers.

Because you have so much peltier elements, it generates too much heat,
so water temperature will raise.

This is easy to test just unplug backside peltiers...

Regards
Kokohemmo

Back to top

« Last Edit: 05.01.13 at 02:34:29 by Kokohemmo »

Epox 8K3A+
Athlon XP 3200+ 333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card

IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #32 - 05.01.13 at 08:38:52 Did you run already the card 200@Mhz ?
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #33 - 05.01.13 at 13:52:07 I don't have the card for the moment... but soon I hope...
Back to top	IP Logged

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #34 - 14.02.13 at 11:18:01

http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=19157&whichpage=2

Quote:

Originally posted by voodoo5k6

Quote:

Originally posted by goriath

Quote:

Originally posted by voodoo5k6

Quote:

Originally posted by Amigamerlin

Really Impressive job mate !!
Simply Fantastic !!!

Thank you Amigamerlin but when I have receieved the card there is no boot, black screen when I push ON Sad

I am so sad.
I can't test it.

So let's make it clear: you're saying this card is not working anymore, right?

Right.

Thanks to Plastik 70 the card can't be repaired that easy Sad

You can't even measure voltage and components... Hard to tell what got damaged.

Back to top

« Last Edit: 14.02.13 at 11:19:48 by Loeschzwerg »

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #35 - 15.02.13 at 17:10:52

Hi,

Some pictures:

The card does not boot! when I plug in the powersupply and vga only without water or the tec connected.
On the motherboard I have error code A3 - beep beep!
A3: IDE enable (in the book)
What does this mean?

nb. perhaps the AGP connector is not very well connected with agp2pci adaptor.
Or the play-doh with salt is not good for the card.

Back to top

IP Logged

H-street YaBB Newbies Offline recent 3dfx enthusiast Posts: 46	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #36 - 15.02.13 at 18:44:53 Holy Crap!!! its ruined? oh wow what a sad day... i think the projects are kindof neat, but i don't know if this price was worth it to lose a v5 6k
Back to top	IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #37 - 15.02.13 at 19:09:07 did you try the card in a normal AGP 3.3V mobo ?
Back to top	IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #38 - 15.02.13 at 19:13:45 The AGP contacts look bad, clean them with ethanol.
Back to top	IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #39 - 16.02.13 at 15:16:05 trevormacro wrote on 15.02.13 at 17:10:52: nb. perhaps the AGP connector is not very well connected with agp2pci adaptor. Or the play-doh with salt is not good for the card. Salt and electric do NOT mix well, this is a bad thing.
Back to top	Rampage is alive! IP Logged

paulpsomiadis God Member Offline -=3Dfx still rox!=- Posts: 2011 Newcastle U.K. Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #40 - 16.02.13 at 16:06:14 HOLY F@@K - WTH happened to that V5 6K? That is some bad SH!ZNET right there!
Back to top	-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+ IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #41 - 18.02.13 at 15:32:20 Loeschzwerg wrote on 15.02.13 at 19:13:45: The AGP contacts look bad, clean them with ethanol. I will have real ethanol tomorrow morning I think. In my country it's very difficult to have ethanol. I will clean the agp connectors front and back and I will let you know. Thank you for the tip.
Back to top	IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #42 - 18.02.13 at 15:35:39

gdonovan wrote on 16.02.13 at 15:16:05:

trevormacro wrote on 15.02.13 at 17:10:52:

nb. perhaps the AGP connector is not very well connected with agp2pci adaptor.
Or the play-doh with salt is not good for the card.

Salt and electric do NOT mix well, this is a bad thing.

I think water + salt is bad thing for electricity.
But salt without water not dangerous perhaps no?
The play-do is now very strong.
Is it possible to remove it without break some smd parts?

Back to top

IP Logged

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #43 - 18.02.13 at 16:33:10

trevormacro wrote on 18.02.13 at 15:32:20:

Loeschzwerg wrote on 15.02.13 at 19:13:45:

The AGP contacts look bad, clean them with ethanol.

I will have real ethanol tomorrow morning I think.
In my country it's very difficult to have ethanol.
I will clean the agp connectors front and back and I will let you know.
Thank you for the tip.

It doesn't have to be pure ethanol, you can also use something like nail polish remover (cheap and works well, but smells ^^). Use Q-tips to clean the contacts.

Plasticine or play dough contents water, otherwise it wouldn't be moldable. Why it got stiff? Well, this is because of the heat/cold that let's the water evaporate.

You should be able to remove the play dough since the card is covered with Plastik 70.

Back to top

IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd Reply #44 - 18.02.13 at 20:21:26 @Loeschzwerg: nail polish remove with acetone is good? to clean the agp connectors. Is acetone dangerous to clean the agp connectors?
Back to top	« Last Edit: 18.02.13 at 21:04:57 by trevormacro » IP Logged

	Welcome, Guest. Please Login