Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 3 4 5 ... 7
Send Topic Print
3dfx Voodoo5 6000 Peltier Watercooling 2nd (Read 4654 times)
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #30 - 04.01.13 at 17:27:30
 
Test is done.
Card is not connected to the PC.

With 2 pieces 92mm for fans:

...

Half hour, my card is 12°C cold behind the GPU. Watertemperature 56°C. Roomtemp 24°C.
I need a very good radiator.

If I had 30°C watertemp, the card reach aprox. -14°C cold.
I need minimum a 480mm radiator to reach this temperature.

What do you think?

What is the VSA-100 temp in action? min temp and max temp for you?

Soon there is the test with my 3 DELTA fans 120 mm.
Any idea about the max frequency with my fans?

Thanks in advance.
Back to top
« Last Edit: 04.01.13 at 17:30:11 by trevormacro »  
 
IP Logged
 
Kokohemmo
YaBB Newbies
*
Offline



Posts: 47
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #31 - 05.01.13 at 02:26:53
 
Hi

First off all, awesome hardware you have made.

In my opinion, you do not need any peltiers behind the card.
It will be in frost ice anyway in behind just with front side peltiers.

Because you have so much peltier elements, it generates too much heat,
so water temperature will raise.


This is easy to test just unplug backside peltiers...

Regards
Kokohemmo
Back to top
« Last Edit: 05.01.13 at 02:34:29 by Kokohemmo »  

Epox 8K3A+
Athlon XP 3200+  333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #32 - 05.01.13 at 08:38:52
 
Did you run already the card 200@Mhz ?
Back to top
 
WWW m14radu  
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #33 - 05.01.13 at 13:52:07
 
I don't have the card for the moment... but soon I hope...
Back to top
 
 
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #34 - 14.02.13 at 11:18:01
 
http://www.3dfxzone.it/enboard/topic.asp?TOPIC_ID=19157&whichpage=2

Quote:
Originally posted by voodoo5k6

Quote:
Originally posted by goriath

Quote:
Originally posted by voodoo5k6

Quote:
Originally posted by Amigamerlin

Really Impressive job mate !!
Simply Fantastic !!!


Thank you Amigamerlin but when I have receieved the card there is no boot, black screen when I push ON Sad
I am so sad.
I can't test it.


So let's make it clear: you're saying this card is not working anymore, right?


Right.


Thanks to Plastik 70 the card can't be repaired that easy  Sad You can't even measure voltage and components... Hard to tell what got damaged.
Back to top
« Last Edit: 14.02.13 at 11:19:48 by Loeschzwerg »  
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #35 - 15.02.13 at 17:10:52
 
Hi,

Some pictures:

...

...

...

...

...

The card does not boot! when I plug in the powersupply and vga only without water or the tec connected.
On the motherboard I have error code A3 - beep beep!
A3: IDE enable (in the book)
What does this mean?

nb. perhaps the AGP connector is not very well connected with agp2pci adaptor.
Or the play-doh with salt is not good for the card.
Back to top
 
 
IP Logged
 
H-street
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 46
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #36 - 15.02.13 at 18:44:53
 
Holy Crap!!! its ruined?  oh wow what a sad day... 

i think the projects are kindof neat, but i don't know if this price was worth it to lose a v5 6k Undecided
Back to top
 
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #37 - 15.02.13 at 19:09:07
 
did you try the card in a normal AGP 3.3V mobo ?
Back to top
 
WWW m14radu  
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #38 - 15.02.13 at 19:13:45
 
The AGP contacts look bad, clean them with ethanol.
Back to top
 
 
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #39 - 16.02.13 at 15:16:05
 
trevormacro wrote on 15.02.13 at 17:10:52:
nb. perhaps the AGP connector is not very well connected with agp2pci adaptor.
Or the play-doh with salt is not good for the card.


Salt and electric do NOT mix well, this is a bad thing.
Back to top
 

Rampage is alive!
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #40 - 16.02.13 at 16:06:14
 
HOLY F@@K - WTH happened to that V5 6K? Shocked

That is some bad SH!ZNET right there! Lips Sealed
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #41 - 18.02.13 at 15:32:20
 
Loeschzwerg wrote on 15.02.13 at 19:13:45:
The AGP contacts look bad, clean them with ethanol.


I will have real ethanol tomorrow morning I think.
In my country it's very difficult to have ethanol.
I will clean the agp connectors front and back and I will let you know.
Thank you for the tip.
Back to top
 
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #42 - 18.02.13 at 15:35:39
 
gdonovan wrote on 16.02.13 at 15:16:05:
trevormacro wrote on 15.02.13 at 17:10:52:
nb. perhaps the AGP connector is not very well connected with agp2pci adaptor.
Or the play-doh with salt is not good for the card.


Salt and electric do NOT mix well, this is a bad thing.


I think water + salt is bad thing for electricity.
But salt without water not dangerous perhaps no?
The play-do is now very strong.
Is it possible to remove it without break some smd parts?
Back to top
 
 
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #43 - 18.02.13 at 16:33:10
 
trevormacro wrote on 18.02.13 at 15:32:20:
Loeschzwerg wrote on 15.02.13 at 19:13:45:
The AGP contacts look bad, clean them with ethanol.


I will have real ethanol tomorrow morning I think.
In my country it's very difficult to have ethanol.
I will clean the agp connectors front and back and I will let you know.
Thank you for the tip.


It doesn't have to be pure ethanol, you can also use something like nail polish remover (cheap and works well, but smells ^^). Use Q-tips to clean the contacts.

Plasticine or play dough contents water, otherwise it wouldn't be moldable. Why it got stiff? Well, this is because of the heat/cold that let's the water evaporate.

You should be able to remove the play dough since the card is covered with Plastik 70.
Back to top
 
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 Peltier Watercooling 2nd
Reply #44 - 18.02.13 at 20:21:26
 
@Loeschzwerg:

nail polish remove with acetone is good? to clean the agp connectors.
Is acetone dangerous to clean the agp connectors?
Back to top
« Last Edit: 18.02.13 at 21:04:57 by trevormacro »  
 
IP Logged
 
Pages: 1 2 3 4 5 ... 7
Send Topic Print