Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 
Send Topic Print
DAYTONA PCI IBM MOD @32Mb PROJECT. (Read 1250 times)
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
DAYTONA PCI IBM MOD @32Mb PROJECT.
04.02.14 at 11:26:09
 
DAYTONA PCI IBM MOD @32Mb PROJECT.

This project is based on 2 MODS. One IBM V4-2 4200 PCI 16Mb DDR will be modified with 64Bits memory and the other with 128Bits memory. Both cards will be upgraded to @32Mb DDR.

[03/02/2014]
Here Gino's card. It will be mod with extra 16Mb DDR 64 Bits.

...

DDR memory 64Bits ready for soldering.
...

04/03/2013

Bios mod done and card shows 32Mb DDR once added extra ram.

...

Card still shows artifacts.
...

10/03/2014

I still having problems- trying differents settings via hack bios my card is 'dead'. Not really dead since PCI.exe detects it but seems I used a bad parameter for hacking bios and once in the flash process it failed. I have tried to flash back my card with original bios but flash utility shows a message is not possible since card is detected as  unknown card.

PCI.EXE detects it as:

...

In the right top left where FF is present there must have 1A / 12 / 0X but SW does not let me to change it manually. Sad

I have tired to reset the chip bios but not way either.

So wahat I decided, I always wanted to do it, is to add a socket bios:

...

I used a programmer SW tool for flashing the chip with original bios but not way either. Card not wake up.

My question is if VSA-101 has small rom in the die chip with info about ID VENDOR from the card. How is possible once added a new chip PLCC with original bios card continue without boot up. Seems as I changed something related ID VENDOR card.

Today my tests.


11/03/2014


I found the problem and I fixed it. Seems hacking the bios with an HEX I modified some id string ans flash utiliy detected the Card as a Voodoo but bios is Naplam/Napalm2. Across the PCI.EXE modified some parameters taking as reference the other Daytona (Not all the values can be changed) but it was enough for flashing tool detects again as a NAPALM/NAPALM2. My error was the first time I used a V5 as reference thinking it was a Napalmd2.

...

Finally with a new hack biios the card works perfect.

BOOTING UP
...

IN BIOS
...

HERE SOME MS-DOS TESTS BASED IN DIFFERENT VGA MODE  Cheesy
...
...
...

Now I need to test both DAYTONAS in Win98SE but at the moment seems all is correct and not glitches.

14/03/2014

Installed Win98SE with reference driver using a KT333 elitegroup motherboard.

Not artifacts in 2D mode. Info driver detects correctly the card with 32Mb.
...

In 3DMode there are not artifacts either but in OpenGL (Quake3) card locks up and in 3DMark2001SE I got a black screen in first test.

...

I think the problem is based on drivers. I need more testing.

19/03/2014


I found the problem why card freezes and downclock speed @143MHz and now is very stable.

Quake 3 1024x768
...

3DMark2000 1024x768 16Bits
...
...

I found dirver is not optimized for Daytona cards. 3DMark2000 has glitches if depth color is set to 32Bit, 16Bits is perfect. 3DMark2001SE has artifacts and only work more or less well with depth color 16Bits.

Today I will do some comparative between both daytonas and different memory size.

Regards,
Oscar.
Back to top
« Last Edit: 19.03.14 at 11:20:33 by osckhar »  
WWW  
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #1 - 05.02.14 at 07:48:36
 
Looking good Osckhar, will you be doing benchmarks before and after??

And compare em to a regular 4500 when ram is 32MB??
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #2 - 06.02.14 at 13:13:38
 
ultima wrote on 05.02.14 at 07:48:36:
Looking good Osckhar, will you be doing benchmarks before and after??

And compare em to a regular 4500 when ram is 32MB??


Yes, I will do different test before and later of the rework

Just little of delay here  with a problem of  different brand memory and waiting to fix it.

Regards,
Oscar.
Back to top
 
WWW  
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #3 - 06.02.14 at 17:41:58
 
I'm really curious if the 4200 @ 32MB performs the same or better then a regular 4500.

128bit SDR vs 64bit DDR...in theory it should be the same....but that is ofcourse in theory.
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #4 - 06.02.14 at 17:52:44
 
Great Projekt Osckhar, as always Smiley
Back to top
 
WWW m14radu  
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #5 - 06.02.14 at 21:20:37
 
Thanks at all! Smiley

In this project the most important is check what is the  performance of a Daytona 32Mb DDR 128Bits instead of 64Bits. A V4-4500 32Mb SDRAM 128Bits is little more fast than a Daytona 32Mb DDR 64Bits at same clock speed.

Regards,
Oscar.
Back to top
 
WWW  
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #6 - 06.02.14 at 21:31:20
 
I thought Daytona only supported 64bit DDR?
Back to top
 
WWW  
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #7 - 07.02.14 at 07:19:36
 
Yes, 64Bit memory controller only since VSA101 was cost reduced version of VSA100, as far as I know.
Back to top
 
 
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #8 - 07.02.14 at 07:38:29
 
Loeschzwerg wrote on 07.02.14 at 07:19:36:
Yes, 64Bit memory controller only since VSA101 was cost reduced version of VSA100, as far as I know.


True, but we all know the "facts"  about the 3DFX hardware can be not 100% true..used to be fact that a vsa-100 supported max 64MB per.chip....so....never hurts to try ofcourse
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #9 - 07.02.14 at 11:11:09
 
Since there is not datasheet for VSA-101 we will not know if dyatona chip is only 64Bits interface memory controller or it is dual 64/128Bits.

Since DAYTONA chip is thought for a low end card could be not compatible with 128Bits.

Regards,
Oscar.
Back to top
« Last Edit: 07.02.14 at 11:11:59 by osckhar »  
WWW  
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #10 - 07.02.14 at 12:50:03
 
Beside all the reports back in 2000 it is very unlikely the VSA-101 does have a 128Bit DDR memory interface. The performance of the architecture itself wasn't competitive anymore back in the days and it would've made the DIE too expensive for what it was meant. Transistorcount and DIE size needs to stay very low for low-end market segment.
Also 3dfx didn't have the ressources to waste on a "complexe" VSA-101, Rampage was the way to go Smiley

But you can surely give it a shot.

Back to top
« Last Edit: 07.02.14 at 12:50:49 by Loeschzwerg »  
 
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #11 - 04.03.14 at 12:22:04
 
Updated first post.

- Oscar.
Back to top
 
WWW  
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #12 - 06.03.14 at 22:35:13
 
Great work as usual Oscar!
Back to top
 

Rampage is alive!
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #13 - 08.03.14 at 10:43:49
 
Well done Osckhar !
Is the card stable ? Please post more details Smiley
Back to top
 
WWW m14radu  
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: DAYTONA PCI IBM MOD @32Mb PROJECT.
Reply #14 - 10.03.14 at 12:28:30
 
Thanks Gary and Radu!

I am having problems. First post updated.

Regards,
Oscar.
Back to top
 
WWW  
IP Logged
 
Pages: 1 2 
Send Topic Print