Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 
Send Topic Print
Softwarematic SLI for Multi V5, in theory possible but.. (Read 874 times)
Gold Leader
Ex Member


Softwarematic SLI for Multi V5, in theory possible but..
12.03.09 at 03:24:58
 
Hi all I have been wondering since this is the drivers section and so on and that we are always interested in new goals, this idea may not seem so new hence Nvidia & ATi are using softwarematic Multi chip partually via their drivers, I had this thought why not 3dfx cards?

For example you have a Voodoo5 5500 AGP as main VGA and a Voodoo5 5500 PCI as slave card alongside the 5500 AGP.

In theory it would be possible for both to communicate in SLI via some hybrid driver, though can such a driver actually be made?

Just something I'd like to know, hence we are all interested in new things maybe this idea isn't such a bad idea after all, as for people with a 6000, they could add 2 5500 PCI's to enable 8 way SLI over 3 cards for example, it may not be as powerfull as 8 way SLI via the hardware mode but on the other hand every extra piece of perfomance added even softwarematically is never a bad thing right?

If this is possible to implent in a driver who would have the courage to make something like this SFFT , AmigaMerlin or Raziel64?  

Only thing remains, there has been no-one that has attempted such a thing because they never felt like doing it or so, shame really...

If 3dfx gamers complain that they want new-gen games like Doom3, Quake 4 as HL2 to run on their cards, as the results are as always sluggish, now if you could combine powers with multiple V5's I am quite sure these new-gen games would do alot better.

The thing is are the 3dfx programmers that make us drivers, planned to something really new like this, if people keep saying it is possible in theory, why don't they make it possible just to prove us it is possible in theory as in reality!  Cool
Back to top
« Last Edit: 12.03.09 at 05:27:18 by N/A »  
 
IP Logged
 
Narmounet
Junior Member
**
Offline


I Love YaBB 2!

Posts: 85
France / Blois
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #1 - 12.03.09 at 10:05:10
 
I Thougth about it a  lot time ago, but I'v a question : would the Bandwidth of the PCI port enough to do it ?

I mean nVidia, Ati or S3 use a software multi GPU, but in a PCIE port which have a lot of bandwith...
Back to top
 
Narmounet  
IP Logged
 
GrandAdmiralThrawn
YaBB Newbies
*
Offline


Better are FOUR.

Posts: 22
Bruck, STMK, Austria
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #2 - 12.03.09 at 10:56:27
 
nVidia's SLI isn't all software. Note, that nVidia GPUs have a hardware-based unit inside their GPU die to handle SLI communications and of course to control the little bus, which runs over what we know as "SLI bridge". I guess ATi also has dedicated logic inside their chips to handle crossfire, dunno about S3.

To answer your question (as far as I'm able to that is): Yes, this is in theory possible. It wouldn't even cost too much bandwidth, because the primary VSA card would sit on the AGP, whereas further "Slaves" would sit on another PCI bus.

Some workstation mainboards even have more than one PCI bus, so the PCI slots may be divided over 2 buses, giving additional bandwidth, as long as you plug each Voodoo on its own bus.

Actually, intercommunication between the VSA chips is not done in some super-fast proprietary way. It is simply that: Another PCI bus implemented on the Voodoo card itself. For the v5 5500, the master VSA acts as PCI bridge to the second one, for the v5 6000, the HiNT HB1-SE66 acts as bridge to provide a PCI Bus supporting four devices on the card (hence, four VSA-100). So, it is all just PCI, no fancy proprietary 3dfx stuff anywhere. The rest is handled by the driver, as far as I know.

Now, for your given example: What I think can NOT be done is relable the 5500's master VSA chips to slaves for the 6000. In that case, the primary VSA-100 on the 6000 would be master, all other VSAs in the whole system would be slaves to that one single master. I guess that does not work. Maybe it's a driver thing, but such a modification might even require BIOS changes, maybe it is even a hardware limitation (quite likely even).

So, you would probably have to create another pure software layer, that combines the VSA cards, does performance evaluation on each complete card (to determine, which card should render larger portions of the screen, and which slower cards should render smaller portions), and then does "Software SLI" with them.

Such a solution would be comparable to what Metabyte tried to do with PGC ("Parallel Graphics Configuration").

The problem with our fellow 3dfx driver coders is, that (as far as i know - feel free to correct me if I'm wrong) they always just worked on the 3dfx codebase, patching it, improving it, fixing it. But developing something as groundbreakingly new as "softwarematic SLI" or PGC is extremely more difficult than patching an existing (maybe even well-documented) codebase.

It might just be far too much to accomplish. What you would need are a few full-time coders working 8 hours a day for maybe a few months to even get a prototype working in a single game or test engine with something like this. Plus, unified framebuffers might not work so easily with such a solution, wasting the memory usage advantage when scaling up the number of VSA's (6000 uses less memory per VSA than 5500, because each VSA only has a quarter of the framebuffer to store in its mem patch instead of half).

Bottom line: Maybe I'm wrong in some of my assumptions, but what i truly think that YES, this can be done, and NO, it will most probably not be done, because it is an extremely hard problem to solve.
Back to top
« Last Edit: 12.03.09 at 10:57:21 by GrandAdmiralThrawn »  

...&&
&&2 x Voodoo5 6000 AGP ([HiNT Rev.3700-A] (dead HB1-SE66), HiNT Rev.3400-A3)&&1 x Quantum3D Obsidian2 X-24&&2 x Diamond Monster3D II 12MB (Diamond MegaMonster)&&1 x Orchid Righteous 3D ("Click"!)&& ...and a lot more!
WWW 34461020  
IP Logged
 
Gold Leader
Ex Member


Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #3 - 12.03.09 at 14:40:55
 
Hmm very good read GAT Smiley

Then I wonder how did NVIDIA & ATi get it working with their GX2's & X2's since a 9800 GX2 and HD 3870 X2 for example are like a 5500 , they have a main GPU/VPU and a slave GPU/VPU, and if adding a second one you'll have the same problem as by adding a 5500 PCI to a 5500 AGP heh, or a 5500 PCI to a 6000.

Okay NVIDIA and ATi have programed quite alot with this idea, hence they can even do 3 way multi chip which would be like combining a 5500 with a 4500 PCI for example.

since the master chips of these GX2's and X2's are the slaves of the host orsay main card as well, so herefore I wonder this aspect on how NVIDIA & ATi did accomplish this Smiley

Back to top
 
 
IP Logged
 
GrandAdmiralThrawn
YaBB Newbies
*
Offline


Better are FOUR.

Posts: 22
Bruck, STMK, Austria
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #4 - 12.03.09 at 15:27:51
 
Well, first, nVidia/ATi have the SLI/CF bridge and then, the communication between the chips has been designed to scale farther from ground up. So, it's just by design.

3dfx had to deal with the AGP port, so multiple high-end cards would not have been possible at all (only 1 AGP Port). Plus, at that time, lots of people were complaining about the additional power requirements of v5 5500 cards, so adding even MORE cards might not have given them a very good reputation.

nVidia has a serial interface, that works like a network topology (PCIe..) with Hubs instead of bridged buses (PCI), so i guess, that makes multi-card "Scalable Link Interface" a bit easier to handle and scale than "Scanline InterLeave"...
Back to top
« Last Edit: 12.03.09 at 15:28:12 by GrandAdmiralThrawn »  

...&&
&&2 x Voodoo5 6000 AGP ([HiNT Rev.3700-A] (dead HB1-SE66), HiNT Rev.3400-A3)&&1 x Quantum3D Obsidian2 X-24&&2 x Diamond Monster3D II 12MB (Diamond MegaMonster)&&1 x Orchid Righteous 3D ("Click"!)&& ...and a lot more!
WWW 34461020  
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #5 - 12.03.09 at 15:45:39
 
AGP 3.0 specifications allowed for multiple AGP ports. But since 3dfx wasn't around then anymore, we never saw AGP SLI.
Back to top
 
WWW  
IP Logged
 
Gold Leader
Ex Member


Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #6 - 12.03.09 at 18:27:58
 
hmm oke, but when we look @ Quantum3D's AA5 setups these were 2 way SLI setups of a total of 16 VSA-100's with either 32 ro 64MB per chip, then I'm like why not use Voodoo2 style instead as Q3D did with their AAlchemy 81.xx series?

Okay I know that Quantum3D is a total different sector but techwise there isn't much difference.

Maybe Dual 5500 PCI's instead heh, ah well someday I hope for sucha  driver to evolve even if it would take a year or two, it would give us more headroom as game support may take us Smiley
Back to top
 
 
IP Logged
 
GrandAdmiralThrawn
YaBB Newbies
*
Offline


Better are FOUR.

Posts: 22
Bruck, STMK, Austria
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #7 - 13.03.09 at 00:42:43
 
Yeah, 3dfx could have done that too (8-way SLI i mean), by simply using more high end bridge chips and more VSA chips on a single board. But to connect two already bridged PCI buses (like the one of a 6000 and the one of the 5500) together over the actual Host PCI bus might just be more complicated. Q3D did even that, but to be honest I don't even know what two AAlchemy 8164 cards would do that one cannot (would it really give double the speed at all modes, or just free 4xFSAA, but same speed at 2xFSAA and no AA)?

And unfortunately, 3dfx was not the driving force in 3D innovation at that time anymore. Don't misunderstand me, innovations like T-Buffer and FSAA were groundshaking to me (look at how may games use Depth of Field Blur and Motion Blur these days), but at that time everbody followed nVidias Innovations.

So, if 3dfx might have introduced the possibility of running multiple AGP cards in one system, I still doubt that any mainboard manufacturer would have built something like that, just to enable users to run some insane monster SLI..
Back to top
 

...&&
&&2 x Voodoo5 6000 AGP ([HiNT Rev.3700-A] (dead HB1-SE66), HiNT Rev.3400-A3)&&1 x Quantum3D Obsidian2 X-24&&2 x Diamond Monster3D II 12MB (Diamond MegaMonster)&&1 x Orchid Righteous 3D ("Click"!)&& ...and a lot more!
WWW 34461020  
IP Logged
 
Gold Leader
Ex Member


Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #8 - 13.03.09 at 02:44:08
 
Yeaps exactly hehe T-Buffer amazed alot of us when that Q3A Motion Blur demo was shown on a rev.A1 1500 V6K @ the Comdex 2000 and now today we can still envy that awesome experience.
it is a shame that everything went NV's way back then, imho 3dfx did have the upper hand tech wise, okay not saying that S3T&L is a bad thing, yeah S3 invented it NV was only the first to ahave put it to use with their GeForce2 GTS heh.

But yeah as you said Motion Blur & Depth of Field Blur are being used today is a hard fact, even Soft Shadows & Soft Reflections are bing used and come to think of it, 3dfx was very ahead of every VGA vendor for it's time, I eman we are speaking Q4 1999, the first 5500 PCB's were from week 44 year 1999 and they had T-Buffer  Lips Sealed

Sometimes it is very strange how things packed out, indeed that Naplam was delayed to much, if it hit the market before the NV10 aka GeForce 256, things would been alot different and maybe 3dfx would of been around even today.
Back to top
« Last Edit: 13.03.09 at 17:55:19 by N/A »  
 
IP Logged
 
RaverX
God Member
*****
Offline


Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #9 - 14.03.09 at 00:12:20
 
I'm sure there were much more problems into getting a working a dual V5 setup. Drivers, operating systems (remember rage fury maxx, that only works in 98, not in xp).

I had my share of experiences with hardware and software, right now I work as a software developer (that's after nearly 5 years of hardware repairs).

During all those years, I found out that hardware tends to be much easier to fix than software to debug. So, I think that the main reason for not getting V5 SLI is the software, not the hardware.

Back to top
 
 
IP Logged
 
Tim
God Member
*****
Offline



Posts: 1065
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #10 - 14.03.09 at 01:45:26
 
I would love to see software SLI, but like Grandadmiral said, who is goint to do it? As far as I know, most are enthusiasts, but not to the level needed to make this work, and completely rewrite most of the driver.

Quote:
imho 3dfx did have the upper hand tech wise,


The matter of the fact is unfortunately, that quite quickly after the Voodoo 2, 3dfx didn't have much on nVidia at all tech wise.

Imho nVidia was already showing it's direction and supremacy after the TNT2, questionably the TNT as well.

I know that viewpoint is probably not very popular on a 3dfx forum, but nVidia did turn out to be one of the biggest innovators in the industry, and has been so for a long time.
Back to top
« Last Edit: 14.03.09 at 02:07:51 by Tim »  
 
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #11 - 14.03.09 at 02:42:21
 
Innovators? All they did was expand upon the original RIVA design;

From Riva to TNT they doubled the pipelines and tmu's.
From TNT to TNT2 they added 32bit color support in 3D rendering. They also shrunk the die size which let them increase the core speed.
From TNT2 to GeForce 256 they again, doubled the pipelines and tmu's and added a HW T&L engine.

Note that Geometry engines were nothing new, nVidia just managed to integrate one into the graphics chip itself.

nVidia hasn't innovated one bit since their RIVA chip, they just improve. So did 3dfx and ATi btw, don't get me wrong.

The last true innovations were unified shaders, s3tc texture compression and fsaa.

Innovation fell into a coma when 3dfx died and Direct3D became the defacto standard.
Back to top
 
WWW  
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #12 - 14.03.09 at 02:42:54
 
Tim wrote on 14.03.09 at 01:45:26:
The matter of the fact is unfortunately, that quite quickly after the Voodoo 2, 3dfx didn't have much on nVidia at all tech wise.



Rampage (with SAGE) was slated to come out after Voodoo II- Voodoo 3 and Naplam were mere placeholders.

Feature creap and Banshee delayed Rampage.

VSA-100 would have never exsisted if Rampage was on time.
Back to top
 

Rampage is alive!
 
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #13 - 14.03.09 at 02:44:22
 
NitroX infinity wrote on 14.03.09 at 02:42:21:
Innovators? All they did was expand upon the original RIVA design;

From Riva to TNT they doubled the pipelines and tmu's.


TNT had 32 color support in 3D, not very fast mind you but it was there.
Back to top
 

Rampage is alive!
 
IP Logged
 
Gold Leader
Ex Member


Re: Softwarematic SLI for Multi V5, in theory possible but..
Reply #14 - 14.03.09 at 04:02:47
 
@ Gdonovan Smiley
Your speak exactly the perfect details! indeed if Rampy was ontime VSA-100 & VSA-100 were never needed and indeed there would of never existed.

VSa-100 was actually more of a Fill the gap sollution, as to expand the develpment of the VSA-200 which actually was planned after Voodoo2 aka SST-2.

But hence the massive delays Banshee & Avenger were added to fill in the gaps and as for Naplam, & Daytone these twe had Rampage tech like Rotated Grid Super Sampled FSAA, Motion Blur, Soft Shadows, Soft Reflections and depth Of Field, these techs were actually taken from the Rampage design.

But the sad thing was, that these techs were hardly supported hence Rotated Grid Super Sampled FSAA but for the trest left to be unused in the main ames that followed.

Okat that there was a Q3A demo that utilized Motion Blue did show what Motion Blur could do but it never was applied to most games, Descent 3 is one of the very few that supports 3dfx Motion Blur.

This can be seen as how the robots around, Motion Blur can be seen very well.
as I have tested with my Voodoo5 5000 PCI here:
...

As you can see the cop bot does show a clear Motion Blur effect as it sways to the right Smiley

I used reso 1024 x 768 x16 in 3dfx Glide + FSAA x4 & LOD Bias -4 with Descent 3 ver 1.5 Beta + PyroMania 1.5 Full, for the 5000 PCI I sued SFFT Alpha 41 modified by ps47 under Win2k Pro + SP4 , yes 3dfx SLI works on the 5000 CPI under any NTFS OS.

@ Nitrox Infinity

Absolutely correct NV didn't really have new designs all what they did is modify the older designs so actually they never had something new under the sun.

I truly agree with you mate.

@ everyone,
I had a few beers tonight  Grin So the typo's do declaire their state hrr hrr.
Back to top
« Last Edit: 14.03.09 at 04:05:28 by N/A »  
 
IP Logged
 
Pages: 1 2 
Send Topic Print