Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 ... 4 5 6 
Send Topic Print
Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling (Read 4594 times)
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #75 - 15.07.13 at 18:58:44
 
I tested the 128 moded cards with a MSI KT3 Ultra and both moded card are running excellent !
I was amazed !
No black screen when entering in the XP. No problems. No errors. No freezes.
I used Amigamerlin & SFFT drivers without an issue !

Seems that the problem appears with the MSI KT3 Ultra2 Mobos only. I will take the NB cooler down, to see and compare the KT333 chip revisions....I suspect that here is the difference Smiley
Back to top
« Last Edit: 15.07.13 at 18:58:57 by m14radu »  
WWW m14radu  
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #76 - 21.07.13 at 05:51:42
 
Just noticed that both MSI KT3 Ultra and MSI KT3 Ultra2 have  the same BIOS revisions binaries available. Maybe this is a chance narrow down what causes the XP incompatibility of 128Mb modded Voodoo5 cards on some motherboards.
If I understand correctly, you have both motherboards available? On Ultra2 you get loadind XP to black screen and on Ultra you have no problems? What BIOS revisions are you running on each one? If they are different, I would try flashing the Ultra2 with the version that currently runs on Ultra and see if that changes anything.
Hope you'll have soon some time to check on that and share the results.
Back to top
 
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #77 - 21.07.13 at 06:27:11
 
Yes, its corect.
I use the same bios version. 5.07 on both motherboards, even swap the bios chips Smiley
With an older bios version there is still the black screen on Ultra2.
Back to top
 
WWW m14radu  
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #78 - 21.07.13 at 06:40:43
 
So now Ultra2 also works in XP with modded 128Mb Voodoo5?
When you tested back in early June and you got black screen loading XP did it had a different BIOS than now?
Back to top
 
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #79 - 21.07.13 at 13:17:47
 
No. Ultra2 still show the black screen.
Only with Ultra is working well.
Back to top
 
WWW m14radu  
IP Logged
 
RaptorZX3
Full Member
***
Offline


Canadian 3DFX user

Posts: 218
Montreal, Quebec (Canada)
Gender: male
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #80 - 16.08.13 at 23:27:42
 
i wish i could ask someone to do the mod on the one i'll get soon, but i bet it would be expensive for me. i wouldn't trust my knowledge in electricity and soldering.
Back to top
 

...
the_raptor(remove_this)@videotron.ca  
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #81 - 24.11.13 at 22:27:05
 
Have you tried to run the 5500pci on a 66Mhz pci slot instead of a normal one??

Perhaps it can use the extra speed?? The agp is nothing morr then a 66Mhz pci version anyway, so ya never know.

I will test this with my card coming week, with an athlon xp 2.4Ghz
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
ps47
God Member
*****
Offline


Keeper of the 3Dfx Helppage

Posts: 988
Slovakia,central Europe
Gender: male
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #82 - 17.12.13 at 00:34:11
 
bit late to this one, but yes, v5 pci will benefit from the 66MHz pci slot, if you can get a mb which has it.
Back to top
« Last Edit: 17.12.13 at 00:34:40 by ps47 »  
296989413  
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #83 - 17.12.13 at 07:46:58
 
see my thread for details how much the 64MB 5500PCI benefits from using PCI 66Mhz:

Quote:
tests are done with cpu at 2.26Ghz and 1GB ram, not quite stable enough yet at 2.38Ghz (40Mhz pci)

3DMark99MAX @ default settings @ PCI33 = 6997 3DMarks
3DMark99MAX @ default settings @ PCI66 = 7447 3DMarks difference = 450 3DMarks

3DMark2000 @ default settings @ PCI33 =4356 3DMarks
3DMark2000 @ default settings @ PCI66 =5052 3DMarks difference = 696 3DMarks

3DMark2001SE @ default settings @ PCI33 = 1976 3DMarks
3DMark2001SE @ default settings @ PCI66 = 3070 3DMarks difference = 1094 3DMarks
3DMark2001SE @ 1600x1200x32 @ PCI66 = 1512 3DMarks



http://www.falconfly.de/cgi-bin/yabb2/YaBB.pl?num=1385394407/15
Back to top
« Last Edit: 17.12.13 at 07:47:10 by ultima »  

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
anthony
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 36
Re: Finally! Voodoo5PCI mod to 128Mb The Ugly Duckling
Reply #84 - 08.04.16 at 19:26:33
 
who do you guys never increase lbf allocation size when add more memory? it's very big mistake. only one card, that don't suffer from it, v4 agp
Back to top
 
 
IP Logged
 
Pages: 1 ... 4 5 6 
Send Topic Print