Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Poll Poll
Question: how should i upgrade my system?

voodoo 2 sli and a newer gpu    
  0 (0.0%)
voodoo5500    
  5 (100.0%)
volt mod my 3000.    
  0 (0.0%)




Total votes: 5
« Created by: ms-dos on: 09.05.14 at 05:59:18 »

Page Index Toggle Pages: 1
Send Topic Print
what to do. (Read 249 times)
ms-dos
Junior Member
**
Offline



Posts: 51
USA
what to do.
09.05.14 at 05:59:18
 
OK I need more power in my 3dfx system, more GPU power that is.
But I don't know what to do. My system is in my sig.

Here is what I'm thinking.
Volt mod the voodoo 3.
This will alliw me to play games at higher rez. But I will lack real time aa and 32-bit color. And the heat.

A newer GPU and a par of voodoo2's
This would be nice for playing newer games at higher rez, and older games might be simpler to setup. But I will not be able to play older games at higher rez or have real time aa and 32-bit color. I do have a old CRT I could switch to for the Voodoo's.

Voodoo 5500.
It would be a thought fit in my system and I would need a new PSU. Other than that I'd love one. That and I'd need to find one.


Withch would you go for?
Back to top
 

CPU: Dual Pentium3 1.4ghz
CPU COOLER: Something different
Motherboard: abit vp6
GPU:AGP voodoo4500
Operating System: NT
Sound Card: sound blaster
 
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: what to do.
Reply #1 - 09.05.14 at 10:31:37
 
I don't really see how voltmodding your voodoo3 would help, just check what ns yer ram of yer card is and you'll get an idea how far ya can go.

Voodoo2 SLI is nice, but limited, so I would go for the 5500.....best card in the bunch and not too expensive if it is an AGP version
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: what to do.
Reply #2 - 09.05.14 at 12:04:21
 
Go for a  voodoo5 !
Back to top
 
WWW m14radu  
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: what to do.
Reply #3 - 09.05.14 at 12:31:07
 
Have you considered a Voodoo4 4500?
Back to top
 
WWW  
IP Logged
 
goriath
God Member
*****
Offline


Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male
Re: what to do.
Reply #4 - 09.05.14 at 13:03:35
 
I would seek for a 5500. In the meanwhile squeeze out more power juice from the 3000 could be interesting. The Voodoo3 3000 could be equiparable or even better of a V2 SLi setup, so I see no reason for the latter if you are looking for performances. No 32bit, true, but what is often forgotten is that you can display 22bit color output instead of 16bit, thanks to the special 3dfx algorithm filter, with no virtually performances drop (actually just a little but not noticeable). If you go for a 5500 is basically for the FSAA.

4500 is a nice one but it is more difficult to find of a 5500. Then the economic speculation practiced on this card could make the 5500 more attractive than a 4500 considering the performance/money POV. And basically you get not much more than 32bit support.
Back to top
 

...
OLD SCHOOL: Because it was done right the first time
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print