Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › 3dfx Section › Tech Talk › Problem with my STB Voodoo2 , Dots and Grids!
(Moderators: FalconFly, gdonovan, NitroX infinity)
‹ Previous Topic | Next Topic ›
Pages: 1 2 
Send Topic Print
Problem with my STB Voodoo2 , Dots and Grids! (Read 418 times)
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Problem with my STB Voodoo2 , Dots and Grids!
Reply #15 - 08.08.08 at 20:38:51  
Right on ! V5 overclocking  Wink
Back to top
 
WWW m14radu  
IP Logged
 
eclypse
YaBB Newbies
*
Offline


I Love YaBB 2!

Posts: 25
Re: Problem with my STB Voodoo2 , Dots and Grids!
Reply #16 - 08.08.08 at 22:59:34  
  Well 3 out of 4 cards are good.. i know forsure that the Diamond Monster 3D 8MB V2 card is older then the STB 12MB cards i have and its totally fine.  

  As i said, the 2 STB V2 cards were bought around the same time if not the same day and one is fine in this system at the standard clocks.

   So as you said, either the GPU or a memory chip on its way out is the cause.. I still think its a weak cap or 2 on the board thats not getting enough juice to the chips thats causing the prob.

Either way its all going on ebay in a few hours today.
Back to top
« Last Edit: 08.08.08 at 23:21:53 by eclypse »  
 
IP Logged
 
Raczek35
YaBB Newbies
*
Offline


I Love YaBB 2!

Posts: 1
Poland
Re: Problem with my STB Voodoo2 , Dots and Grids!
Reply #17 - 05.04.09 at 05:07:23  
eclypse:
"I was testing it out using an old graphics bench program called 3dmark2000."
(...)
"I forgot to add that i'm using the default drivers right off the original STB instlal disk"


"3DMark 2000" is for DirectX 7.0 - be sure that your drivers from STB are for DX7.
Back to top
 
 
IP Logged
 
Pages: 1 2 
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge