3dfx Archive - Canopus Pure 3D Loopcable

P200

Junior Member

Offline

Viva Chile Mierda!!!

Posts: 54
Santiago, Chile
Gender: male

Canopus Pure 3D Loopcable
20.12.11 at 21:38:39

Hi everybody,

Recently I bougth a Canopus Pure3D, nice card (thanks edmundoab) BUT... It doesn't have the loopcable.

Tried using Wizmark for testing functionality, and works OK. I guess that if works under Wizmark, at least it's working fine, right?

Well, I was looking all over Google for the damned cable hahaha some tutorial for DIY cable, some guy selling his loopcable, but nothing found yet Sad

Is there any Pinout for this cable? Note that is a 9-pin cable, very similar but no exactly as a Svideo cable. No chance to get the cable in normal Radioshack tought Undecided

In the other way, I don't know if it's possible to get TV Out using reference drivers, or is possible only using the Canopus drivers?

Help!!! Thanks in advance,
Renato.

Back to top

IP Logged

Thema Senior Member Offline Hardcore Powah Posts: 485 Slovenia Gender:	Re: Canopus Pure 3D Loopcable Reply #1 - 22.12.11 at 09:16:18 I am guessing the mini din connector uses signals like old 9pin vga connectors. If I find the cable I can try to measure the exact pinout and post it later.
Back to top	IP Logged

Thema Senior Member Offline Hardcore Powah Posts: 485 Slovenia Gender:	Re: Canopus Pure 3D Loopcable Reply #2 - 22.12.11 at 21:21:17 I am unable to find the canopus box somehow, but i went ahead with a cable from a miro v2 card witch I believe is the same This is what I came up with
Back to top	IP Logged

P200

Junior Member

Offline

Viva Chile Mierda!!!

Posts: 54
Santiago, Chile
Gender: male

Re: Canopus Pure 3D Loopcable
Reply #3 - 25.12.11 at 12:43:46

Thema, that's simply AWESOME Cheesy

Yeah, the miro Hiscore it's the european version of the Canopus, so it should be the same connector and therefore the same pinout.

So, i'm gonna search the damned connector on my local electronic store, or in other case, tryin to make a stable connection.

BTW, yesterday I managed to make it run with two monitors, but as I were using a LCD, the refresh rate weren't addequate and it showed up a popup warning all the time.

Seems that it's imperative yo use a CRT for the Voodoo1 cards.

http://www.youtube.com/watch?v=sR2438VtqTE

Back to top

IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Canopus Pure 3D Loopcable Reply #4 - 25.12.11 at 13:23:15 P200 wrote on 25.12.11 at 12:43:46: Seems that it's imperative yo use a CRT for the Voodoo1 cards. I have used LCD's for years without problem.
Back to top	Rampage is alive! IP Logged

RaverX

God Member

Offline

Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male

Re: Canopus Pure 3D Loopcable
Reply #5 - 25.12.11 at 17:44:42

gdonovan wrote on 25.12.11 at 13:23:15:

P200 wrote on 25.12.11 at 12:43:46:

Seems that it's imperative yo use a CRT for the Voodoo1 cards.

I have used LCD's for years without problem.

It depends a lot on the LCD. I had a few LCD that looked very bad if they go signal for V2 - it looked like 4 bit. But I also had LCDs that looks good. Anyway, I don't think there are LCDs with native resolution 640x480 and downscaling image will never look perfect, especially when the source is analog.

Back to top

IP Logged

P200

Junior Member

Offline

Viva Chile Mierda!!!

Posts: 54
Santiago, Chile
Gender: male

Re: Canopus Pure 3D Loopcable
Reply #6 - 28.12.11 at 04:34:55

RaverX wrote on 25.12.11 at 17:44:42:

gdonovan wrote on 25.12.11 at 13:23:15:

P200 wrote on 25.12.11 at 12:43:46:

Seems that it's imperative yo use a CRT for the Voodoo1 cards.

I have used LCD's for years without problem.

It depends a lot on the LCD. I had a few LCD that looked very bad if they go signal for V2 - it looked like 4 bit. But I also had LCDs that looks good. Anyway, I don't think there are LCDs with native resolution 640x480 and downscaling image will never look perfect, especially when the source is analog.

Exactly, that´s the point. I was using a Samsung LCD monitor, and luckily got signal but with the warning in the middle of the screen. Then, tried with an AOC and a LG, none of them had signal whatsoever with my V1 or V2.

Later that day tried my old trusted Samsung CRT, and voilá, it showed everything.

So, my personal lesson: never throw the CRT to the garbage while my V1s and V2s still works!

PD: Is the Pure3D connector easy to find in a local electronic store? Or it's some kind of Canopus propietary design?

Thanks guys, you're awesome!

Back to top

« Last Edit: 28.12.11 at 04:40:31 by P200 »

IP Logged

sigtau Junior Member Offline I'm Obsessed with 3Dfx!!! Posts: 86 Houston, TX USA Gender:	Re: Canopus Pure 3D Loopcable Reply #7 - 30.12.11 at 18:17:47 I have a spare loop back cable I can sell from a dead card. I'll check my stash when I get off work in a few hours.
Back to top	IP Logged

P200 Junior Member Offline Viva Chile Mierda!!! Posts: 54 Santiago, Chile Gender:	Re: Canopus Pure 3D Loopcable Reply #8 - 02.01.12 at 00:46:42 sigtau wrote on 30.12.11 at 18:17:47: I have a spare loop back cable I can sell from a dead card. I'll check my stash when I get off work in a few hours. Yay!! That would be great!!! Hope you find the Canopus cable
Back to top	IP Logged

razrx God Member Offline 3dfx Addict Posts: 839 Great Lakes, Canada Gender:	Re: Canopus Pure 3D Loopcable Reply #9 - 08.01.12 at 05:29:03 Here's an ebay auction for the cable you're looking for: http://www.ebay.de/itm/3dfx-Loop-Kabel-/280802761293?pt=LH_DefaultDomain_77&hash...
Back to top	IP Logged

sigtau

Junior Member

Offline

I'm Obsessed with 3Dfx!!!

Posts: 86
Houston, TX USA
Gender: male

Re: Canopus Pure 3D Loopcable
Reply #10 - 10.01.12 at 21:15:58

P200 wrote on 02.01.12 at 00:46:42:

sigtau wrote on 30.12.11 at 18:17:47:

I have a spare loop back cable I can sell from a dead card. I'll check my stash when I get off work in a few hours.

Yay!! That would be great!!! Cheesy

Hope you find the Canopus cable Cheesy

It looks like I must have sold it with the dead card last year. I'd go for the auction that razrx pointed out since that is an awesome price.

Back to top

IP Logged

P200

Junior Member

Offline

Viva Chile Mierda!!!

Posts: 54
Santiago, Chile
Gender: male

Re: Canopus Pure 3D Loopcable
Reply #11 - 12.01.12 at 18:26:01

sigtau wrote on 10.01.12 at 21:15:58:

P200 wrote on 02.01.12 at 00:46:42:

sigtau wrote on 30.12.11 at 18:17:47:

I have a spare loop back cable I can sell from a dead card. I'll check my stash when I get off work in a few hours.

Yay!! That would be great!!! Cheesy

Hope you find the Canopus cable Cheesy

It looks like I must have sold it with the dead card last year. I'd go for the auction that razrx pointed out since that is an awesome price.

yes, the auction prize is very, very nice! But, the sellers asks over US$50 ONLY IN SHIPPING Sad

For this time, I'll pass. It's too much, only for the shipment I think

Back to top

IP Logged

	Welcome, Guest. Please Login