3dfx Archive - Is voodoo 3 AGP 3.3V or 1.5V???

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › Is voodoo 3 AGP 3.3V or 1.5V???

(Moderators: gdonovan, NitroX infinity, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1

Is voodoo 3 AGP 3.3V or 1.5V??? (Read 274 times)

Antohe Cristian Guest	Is voodoo 3 AGP 3.3V or 1.5V??? 06.03.05 at 09:42:01 I want to by an P4 with intel mainboard and I want to know if it will stil work with my Voodoo 3 2000 AGP!!! ???
Back to top	IP Logged

OutOfRange

Senior Member

Offline

Posts: 348
Switzerland
Gender: male

Re: Is voodoo 3 AGP 3.3V or 1.5V???
Reply #1 - 06.03.05 at 10:01:56

No thats not possible.
You cannot plug the card in cause there is a mechanical barrier to prevent the connecting of incompatible cards:
the voodoo series agp cards all (exept 4500 AGP and some special 5500 4xAGP) use the 2xAGP interface with 3,3V signal voltage, 4x AGP which comes on all new boards only uses 1,5V Undecided

if you want still a 3dfx card in your sys you can use pci card or a Voodoo 4 4500 AGP

« Last Edit: 06.03.05 at 10:02:52 by OutOfRange »

IP Logged

Matthew Lawson Guest	Re: Is voodoo 3 AGP 3.3V or 1.5V??? Reply #2 - 26.03.05 at 04:51:57 My AGP slot is not keyed. I've looked in several manuals, but none of them have specific specification as to what AGP rate I have. I know I can't use 8x, my card is running in 4x right now. Will putting in a card to test that isn't compatible make my computer/card a'splode?
Back to top	IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: Is voodoo 3 AGP 3.3V or 1.5V??? Reply #3 - 26.03.05 at 05:23:45 If you attempt to operate such a combination, you will destroy either the Motherboard and/or the Video Card in most cases.
Back to top	WebMaster FalconFly Central 3dfx Archive IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Is voodoo 3 AGP 3.3V or 1.5V??? Reply #4 - 26.03.05 at 06:20:46 Quote: I want to by an P4 with intel mainboard and I want to know if it will stil work with my Voodoo 3 2000 AGP!!! ??? Intel mainboard? Chances are no.
Back to top	Rampage is alive! IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: Is voodoo 3 AGP 3.3V or 1.5V??? Reply #5 - 26.03.05 at 12:27:14 This should make things clear: Click on it for a larger version.
Back to top	My Blog IP Logged

Eye-Q

God Member

Offline

Posts: 522
Germany
Gender: male

Re: Is voodoo 3 AGP 3.3V or 1.5V???
Reply #6 - 26.03.05 at 13:04:20

Quote:

This should make things clear:

Click on it for a larger version.

The problem at early P4-boards is that there were AGP Universal slots (without breaks) installed though they weren't "real" Universal slots but AGP4x (1,5V) slots. This constellation destroyed many boards and cards as they were assembled although they didn't match.

Once more the warning to Antohe Cristian: No P4-Mainboard ever had support for AGP with 3,3V voltage even if it had installed an AGP Universal slot!

IP Logged

FalconFly YaBB Administrator Offline 3dfx Archivist Posts: 2445 5335N 00745E Gender:	Re: Is voodoo 3 AGP 3.3V or 1.5V??? Reply #7 - 26.03.05 at 13:11:12 And to add to the desaster : Some older Cards were produced as 4x AGP, but electrically were 2x AGP only. Others were 2x AGP but do not posess the proper AGP Keying and will fit into a 4x AGP Slot.
Back to top	« Last Edit: 26.03.05 at 13:11:34 by FalconFly » WebMaster FalconFly Central 3dfx Archive IP Logged

gdonovan YaBB Administrator Offline Infernal Collector Posts: 2361	Re: Is voodoo 3 AGP 3.3V or 1.5V??? Reply #8 - 26.03.05 at 13:19:05 Quote: if you want still a 3dfx card in your sys you can use pci card or a Voodoo 4 4500 AGP ALMOST! None of the Powercolor 4500's are AGP x 4, they are AGP x 2 and run at 3.3 volts even though they have a AGP x 4 connector.
Back to top	Rampage is alive! IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page