Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Obsidian 200SB Glide issue (Read 478 times)
profvonhelsing
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 14
Obsidian 200SB Glide issue
04.07.11 at 18:36:09
 
I have 2 Obsidian 200SB cards and for both of them I get a message just as the windows 98SE desktop appears, the message is , "_GlideInitEnvironment: glide2x.dll expected Voodoo, none detected" The drivers installed fine for the card and it shows 2 obsidian 3D cards show up in the device manager with no errors, does anyone know what the problem could be, also which file do I have to rename to opengl32.dll and drop into the quake 3 folder?
Back to top
 
 
IP Logged
 
rottentreats
God Member
*****
Offline


3dfx > Reality

Posts: 616
Minnesota [USA]
Gender: male
Re: Obsidian 200SB Glide issue
Reply #1 - 04.07.11 at 21:17:44
 
Try using stock Voodoo2 drivers, thats what I use for all my Q3D Voodoo2 based cards and have never had an issue. (200 Sbi, X-24, etc)   Cool
Back to top
 
 
IP Logged
 
profvonhelsing
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 14
Re: Obsidian 200SB Glide issue
Reply #2 - 04.07.11 at 21:56:13
 
HI

Thanks for that it works a treat now, just ran Q3 at 60fps with the 200SBi on the voodoo 2 drivers, never would have thought of that.

PS. the double Quantum3D AAlchemy card I bought from you last year works great also, I made a power supply for it.
Back to top
 
 
IP Logged
 
Menkau_ra
YaBB Newbies
*
Offline



Posts: 37
USA
Gender: male
Re: Obsidian 200SB Glide issue
Reply #3 - 13.07.11 at 00:37:00
 
Usually you get a Glide error if you trying to install different drivers for your Voodoo card. Reinstalling Windows always help.
What manual did you use to make PSU for Aalchemy?
Back to top
 
 
IP Logged
 
profvonhelsing
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 14
Re: Obsidian 200SB Glide issue
Reply #4 - 19.07.11 at 19:19:05
 
I did not have a manual, I basically knew the voltages and current needed for the double card to work and constructed a power supply from 2 different power supplies, and it powers 2 cards with a total of 16 VSA100 chips, the total load when fully running is around 45Amp on the 2.7Volt line as it is the 512MB ram cards that I have (memory chips on both sides of the boards)
Back to top
« Last Edit: 19.07.11 at 19:20:19 by profvonhelsing »  
 
IP Logged
 
Menkau_ra
YaBB Newbies
*
Offline



Posts: 37
USA
Gender: male
Re: Obsidian 200SB Glide issue
Reply #5 - 25.07.11 at 20:08:50
 
Can you make a post the manual how you made it? Smiley
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print