Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 3 
Send Topic Print
Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI (Read 1096 times)
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
05.10.13 at 16:44:02
 
I have done in the past a couple of voltmods on Voodoo 5 5500 AGP cards, but these days I was wondering about modding the PCI version so I searched the web for a guide and found none, so I decided to start from scratch and share the infos when successful.
So here it goes:

... ...

If you want to a higher overclock on your Voodoo5 5500 PCI you need to increase the voltage applied to the GPUs. I warn you need good cooling and you probably should not go past 3.3V. All you need to do is solder a 10KOhm multi-turn trimmer in parallel with R123 (top right of the card). Before soldering I suggest you set the trimmer to above 9.5KOhm. Take your multimeter and place one probe on the marked measuring point (on the voltage regulator, bottom right of the card) with the other probe connected to ground. With the system running, turn the knob on the trimmer keeping watch on the read voltage until you reach the desired value. Have fun!  Tongue
With the pictured card with no voltmod applied I could overclock to about 180Mhz, but after modding I was able to go up to 190Mhz when the stock 6ns RAM kicked in and started trowing artifacts. 3.2V were needed to fed the GPUs to get the card stable and it got hotter than usual.
Back to top
« Last Edit: 26.10.13 at 15:50:14 by Komponent »  
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voltmod guide to Voodoo5 5500PCI-Playing with fire
Reply #1 - 06.10.13 at 07:32:20
 
Great research Komponent !
Maybe with a better cooling more than 190Mhz is possible !
Is this your card ? Smiley
Back to top
 
WWW m14radu  
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Voltmod guide to Voodoo5 5500PCI-Playing with fire
Reply #2 - 06.10.13 at 11:16:59
 
Yes, my card. 190+ Mhz not possible because of RAM.
I'm not into overclocking, just did it for the fun of discovering a new mod.
Back to top
 
 
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Voltmod guide to Voodoo5 5500PCI-Playing with fire
Reply #3 - 26.10.13 at 15:08:15
 
Update: RAM voltmod for V5 PCI
So now you have both GPU and RAM voltmod guide for Voodoo5 5500 PCI. See pictures bellow:

... ...

Voodoo4 AGP GPU voltmod:

... ...

Voodoo4 PCI GPU and RAM voltmod:

... ...

Maybe one day someone might find this work useful in assisting overclocking those cards...
Back to top
« Last Edit: 26.10.13 at 15:56:04 by Komponent »  
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #4 - 26.10.13 at 22:18:27
 
Hi Komponent,

What a nice guide. you are crazy with your voltmod. I like it.

Continue with your great tips.

Congratulations.

Thanks
Back to top
 
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #5 - 27.10.13 at 16:39:37
 
thanks for sharing this info Komponent !
As always, amazing mods Smiley

the next stept will be voltmod for a v56k  Roll Eyes
Back to top
« Last Edit: 27.10.13 at 16:40:09 by m14radu »  
WWW m14radu  
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #6 - 27.10.13 at 16:48:52
 
Thanks, lads,
Cheesy If I had access to a 6000 it would be an easy task, though I wonder who would dare to voltmod his.  Grin
On the other side, I would have loved to mod a 6000 to 256Mb or at least to see it done... A man can dream, right?
Back to top
 
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #7 - 27.10.13 at 17:11:53
 
it could become a reality Smiley
just need to find a 6000 owner who is willing to do this...

what about a voodoo3 voltmod or memory mod ? 32mb  ? Smiley
Back to top
« Last Edit: 27.10.13 at 17:54:46 by m14radu »  
WWW m14radu  
IP Logged
 
goriath
God Member
*****
Offline


Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #8 - 27.10.13 at 22:05:43
 
m14radu wrote on 27.10.13 at 17:11:53:
it could become a reality Smiley
just need to find a 6000 owner who is willing to do this...

what about a voodoo3 voltmod or memory mod ? 32mb  ? Smiley


AFAIK Avenger is limited to 16MB.
About the voltmod it has been done already, If I remember correct you need to install a potentiometer on the last two lead of the power regulator, I'll check...
Back to top
 

...
OLD SCHOOL: Because it was done right the first time
 
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #9 - 28.10.13 at 05:51:08
 
Yeah, I might be wrong, but voltmods for Voodoo2, Banshee and Voodoo3 have already been done, AFAIK.
32Mb for Voodoo3 might be possible, for the PCI SGRAM model, but I do not own any such card.
Back to top
 
 
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #10 - 28.10.13 at 10:44:46
 
Well done komponent!!!

What I would do in VRam / Vcore is look for right smd resistor value for working voltage wished. It would be more cleaned work.

V3@32Mb- same problem here I dont own a common V3 PCI SGRAM for doing the mod. I guess it will work enabled second chip via bios. Similar V4 @128Mb.

V5-6000 @256Mb MOD- It will be done very soon. Just waiting for some stuff.

Regards,
Oscar.
Back to top
 
WWW  
IP Logged
 
Komponent
Senior Member
****
Offline


3dfx modder

Posts: 282
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #11 - 29.10.13 at 05:05:33
 
Hell yes! That's what I'm talking about! Finally someone has the balls to put forward a 6000.
Back to top
 
 
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #12 - 29.10.13 at 06:58:35
 
I might have a voodoo3 pci sgram which you can use for the modding, I will check tonight and let you know.
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #13 - 29.10.13 at 11:53:50
 
Before end of this year we will see a V5-6000 @256Mb. I already own a dead 6k for unsolder BGA chips and follow traces for strapping.  Just I need to find some time free. Too much projects here!

komponent- do you want to go for V3 PCI @32Mb mod? If you go for this I have in mind a Banshee @32Mb. I have some idea what resistor are needed to set 16Mb with only 4 memory bank. Now looking for ELITME 4Mb 5.5ns per chip.

Regards,
Oscar
Back to top
 
WWW  
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voltmod guide Voodoo5 5500 PCI and Voodoo4 AGP&PCI
Reply #14 - 29.10.13 at 12:29:34
 
V5 6000 @256mb - a dream come true Smiley
Back to top
 
WWW m14radu  
IP Logged
 
Pages: 1 2 3 
Send Topic Print