Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Problem with VooDoo 2 SLI (Read 381 times)
Toman
YaBB Newbies
*
Offline


I Love YaBB 2!

Posts: 5
Problem with VooDoo 2 SLI
14.04.08 at 22:31:13
 
- i build old PC, Pentium 166, 256Mb Ram, 40Gb HDD, MSI MS-5169
- Windows 98 SE DX7
- V2 driver 3.02.02
- driver is instaled corectli for both card

- i have two ProComp G111 Voodoo2 12MB
- when i us onli one V2 everything is OK (both card testet separatly)
- problem start when i plug SLI cable betwen to cards (home made cable, 4 line is crosed, cable is OK)
- all 3D application crash
- when i click in "display properties" / 3dfx v2-1000 , screen made "bling" and window is "freez" (i must press CRTL+ALT+DEL) and end proces....

i try FastVoodoo2 V4.6. but not help me.

when i unplug SLI cable (V2 in sigle mode) driver work corectly.

Thanks for any help

Toman  Wink

Sorry for my bad english
Back to top
« Last Edit: 14.04.08 at 22:31:53 by Toman »  
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Problem with VooDoo 2 SLI
Reply #1 - 14.04.08 at 23:02:48
 
How long is the cable? Huh

It must be as short as possible... Tongue
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Toman
YaBB Newbies
*
Offline


I Love YaBB 2!

Posts: 5
Re: Problem with VooDoo 2 SLI
Reply #2 - 14.04.08 at 23:23:26
 
around 6cm..
Back to top
 
 
IP Logged
 
ps47
God Member
*****
Offline


Keeper of the 3Dfx Helppage

Posts: 988
Slovakia,central Europe
Gender: male
Re: Problem with VooDoo 2 SLI
Reply #3 - 14.04.08 at 23:57:00
 
my bet would be a faulty SLI cable (especially when its homemade-when I tried to make it myself,I have busted two floppy cables before I finally got it right.you should test all the wires for contact-small battery,couple of wires and a small bulb can do the job nicely)..you can try other pci slots,but I doubt it will help.

SK: ja tipujem zly SLI kabel (obzvlast ak je zbastleny-ked som to skusal zbastlit ja,znicil som dva floppy kable kym sa mi to konecne podarilo.mal by si skusit ci je vsade kontakt-tuzkova baterka,par drotov a mala ziarovka by mali stacit )..pripadne skus ine pci sloty,ale pochybujem ze to pomoze.


edit: this should help a little:

prikladam schemu prepojenia pinov ak budete testovat ci je kabel priechodny (tie prazdne su tak isto ako tie na krajoch):
[I'm adding a pin connection scheme (the "empty" pins are connected the same way as those on the left side),remember,if the pins arent connected properly the SLI cable wont work.checking all the connections with few wires,batteries and a small bulb is recommended.]
...
Back to top
« Last Edit: 15.04.08 at 00:10:43 by ps47 »  
296989413  
IP Logged
 
Toman
YaBB Newbies
*
Offline


I Love YaBB 2!

Posts: 5
Re: Problem with VooDoo 2 SLI
Reply #4 - 15.04.08 at 10:12:36
 
i check SLI cable again and all pin is OK

i try new computer MB Asus P5K
Back to top
 
 
IP Logged
 
Toman
YaBB Newbies
*
Offline


I Love YaBB 2!

Posts: 5
Re: Problem with VooDoo 2 SLI
Reply #5 - 15.04.08 at 14:25:25
 
i try Voodoo2 in new computer E6320/P5K/Win XP Pro
driver: 4.0 Gold Edition for XP

Screen:
...

in any 3d Program (games/3D Mark 2000/2001) is VooDoo 2 not available...

To PS47: keby som ti tie karty priniesol vedel by si sa mi nane kuknut? (ci som debil ja alebo kde je problem.....)
Back to top
« Last Edit: 15.04.08 at 15:56:01 by Toman »  
 
IP Logged
 
ps47
God Member
*****
Offline


Keeper of the 3Dfx Helppage

Posts: 988
Slovakia,central Europe
Gender: male
Re: Problem with VooDoo 2 SLI
Reply #6 - 15.04.08 at 16:05:17
 
d3d is not available under winxp,glide support should be available by default,and opengl must be configured manually (for most apps).

the control panel wont show stuff correctly,this is expected..see here.


kludne sa ti na ne mozem mrknut,aj ked myslim ze s trochou stastia to doriesime aj na dialku.
Back to top
« Last Edit: 15.04.08 at 16:06:17 by ps47 »  
296989413  
IP Logged
 
max1024
YaBB Newbies
*
Offline



Posts: 13
Belarus
Gender: male
Re: Problem with VooDoo 2 SLI
Reply #7 - 17.04.08 at 22:21:04
 
It is possible 2 run V2 under WXP in D3D but it is very, very difficult. Last year I experemented with this problem and have got a result http://service.futuremark.com/compare?2k1=9175816 I think it is very good result, but SLi in this case doen't work.
Back to top
 
WWW 483107466  
IP Logged
 
Toman
YaBB Newbies
*
Offline


I Love YaBB 2!

Posts: 5
Re: Problem with VooDoo 2 SLI
Reply #8 - 17.04.08 at 22:47:55
 
- i build 3rd SLI cable - all 3 is checked - all pin OK (2cm)
- but SLI not work (driver or app. freez)
- in single mod all dork ok

T. Cry
Back to top
 
 
IP Logged
 
ps47
God Member
*****
Offline


Keeper of the 3Dfx Helppage

Posts: 988
Slovakia,central Europe
Gender: male
Re: Problem with VooDoo 2 SLI
Reply #9 - 18.04.08 at 00:51:09
 
I think I'll have a look at the issue personally-turns out Toman lives pretty close to my place..at least I'll do something meaningful on my next weekend work shift Grin
Back to top
« Last Edit: 18.04.08 at 00:51:19 by ps47 »  
296989413  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print