Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 3 4
Send Topic Print
Need help with my Voodoo2 SLI (Read 1532 times)
Mansfield
Full Member
***
Offline


Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male
Need help with my Voodoo2 SLI
02.11.06 at 19:52:15
 
Hi there I'm new here. I joined because I need some some solutions to my problem.

I got two techworks power 3d 2 voodoo2 graphics cards. I'm not sure are they same type but I think they both are 12mb
so I made sli cable by myself. but I cant get them working. The win 98 works normaly at the desktop. if I use some 3d programs or voodoo2 setup at display gonfigurationpanel. the program freese but not crash win98.
the other one v2 work alone, but with the other win98 and 3d programs (ex 3dmark99max) starts normally but the graphics are awful.

So what should I do

PS. the alone working V2 worked only in the first pci slot could problem be in motherboard. the MoBo is MSI MS-6117

PSS: sorry my english I'm from Finland
Back to top
 

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&
 
IP Logged
 
exxe
God Member
*****
Offline


^^

Posts: 1316
germany
Re: Need help with my Voodoo2 SLI
Reply #1 - 02.11.06 at 21:41:52
 
did you twist the 4 middel lines from the SLI cable?

did the other card run alone too?
Back to top
 

...
WWW 233274082  
IP Logged
 
Mansfield
Full Member
***
Offline


Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #2 - 02.11.06 at 22:01:09
 
Quote:
did you twist the 4 middel lines from the SLI cable?

did the other card run alone too?


yes i twisted 4middle lines
the other one had problems to run 3d properly
Back to top
 

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #3 - 02.11.06 at 23:01:16
 
Hmm...seems you have some problems... Roll Eyes

1. It doesn't matter if the two V2 cards are identical - although you are correct that is is better. V2 cards can be SLI configuration with different V2 cards using 'mismatch' drivers such as "FastVoodoo2". Wink

Quote:
the other starts normally but the graphics are awful


2. One of your cards seems faulty - test the card in another mainboard, if it still won't work then replace the card before you try and SLI. Cry

Quote:
the alone working V2 worked only in the first pci slot


3. Seems your mainboard does not like Voodoo 2 cards, except in PCI slot 1 for some reason? ???

4. Be sure your SLI cable is as short as possible (the distance between two V2 cards in adjacent PCI slots). Wink
Back to top
« Last Edit: 02.11.06 at 23:02:43 by paulpsomiadis »  

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Mansfield
Full Member
***
Offline


Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #4 - 03.11.06 at 17:15:46
 
Ok I maybe get a new motherboard soon, maybe even with 2*CPU slots Cheesy , I should try with it then. What drivers should I use. It needs to be fit all V2 cards.
Back to top
 

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #5 - 04.11.06 at 04:26:18
 
"FastVoodoo2" drivers are the best. Wink

Go to: -

http://www.3dfxzone.it

Look at the left menu and scroll down and click on "Voodoo 2". Smiley

On the new page click on "Drivers" Smiley

Then choose your operating system and it will give you the appropriate link for the best version of "FastVoodoo2" Cheesy

Good luck! 8)
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Mansfield
Full Member
***
Offline


Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #6 - 06.11.06 at 18:42:11
 
ok I tried the non working V2 alone again with the same motherboard. and used 3dfx Voodoo2 V3.02.02 again, in screen setup i clicked voodoo2 settings, and it gave me this: " _GlideInitEnviroment: glide2x.dll expected voodoo^2, none detected " seems to be that my V2 card is broken?? Cry I'll wait the other motherboard and try fastvoodoo2 drivers. or is there anything to do?
I bought this V2 from finnish ebay-like netsite and the seller didn't tell that he won't sure does it work or not  Angry  or could I have broke the card, cuz in that day temperature was below zero outside, and the was arrived in the morning and I picked mail after 8pm and I waited ½-1hour that card would get warmed. Should I have waited more time? Embarrassed
Back to top
 

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&
 
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: Need help with my Voodoo2 SLI
Reply #7 - 06.11.06 at 21:50:27
 
Quote:
_GlideInitEnviroment: glide2x.dll expected voodoo^2, none detected " seems to be that my V2 card is broken??


I'd say so.
Back to top
 

Rampage is alive!
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #8 - 06.11.06 at 22:58:22
 
Quote:
" _GlideInitEnviroment: glide2x.dll expected voodoo^2, none detected "


Your card is toast! Cry

Broken, history, totalled! Cry

It's nothing to do with the cold, as half an hour is more than enough to get rid of any condensation! Roll Eyes

Looks like the card was broken to begin with... Tongue
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Mansfield
Full Member
***
Offline


Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #9 - 07.11.06 at 17:51:02
 
Nooooooooo Cry
well that wasn't so expensive 7€. but the seller didn't told nothing about condition
but now it is hard to find another one  Undecided

edited 8.11.2006 6.13pm
Back to top
« Last Edit: 08.11.06 at 17:13:45 by Mansfield »  

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #10 - 07.11.06 at 22:56:17
 
Sorry man - but it does happen from time to time! Roll Eyes

I've also bought some things on eBay and had them turn up D.O.A. Tongue

I feel the pain...trust me! Cry
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: Need help with my Voodoo2 SLI
Reply #11 - 07.11.06 at 23:40:30
 
I have two or thee V2 boards I'm going to place up for sale soon if you need one.

Cheap too.
Back to top
 

Rampage is alive!
 
IP Logged
 
Mansfield
Full Member
***
Offline


Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #12 - 08.11.06 at 17:15:24
 
Quote:
I have two or thee V2 boards I'm going to place up for sale soon if you need one.

Cheap too.


how cheap? Wink but I think that I'm gonna first try from Finland. Do you know how much is the shipping from Danmark to Finland?
Back to top
 

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&
 
IP Logged
 
Mansfield
Full Member
***
Offline


Voodoo 2 SLI - the cheapest
and the best SLI

Posts: 212
Finland
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #13 - 08.11.06 at 17:28:19
 
what should I do with broken V2 ???
Back to top
« Last Edit: 08.11.06 at 20:15:41 by Mansfield »  

Intel E4300 1,8GHz@2395MHz(results)/ASrock 775Dual-VSTA/DDR2 667 2048MB/Radeon HD 4850 512MB/Western Digital 80Gt+Samsung320Gt/LC-Power 420W&&Intel PIII 800MHz/DFI CS35-SC/256mb sdram/ATI RAGE XL 8Mb+2*Voodoo2@SLI=24Mb/&&Intel PIII 800MHz@900MHz/DFI CS35-SC/256mb sdram/Voodoo3 3500TV AGP&&
 
IP Logged
 
paulpsomiadis
God Member
*****
Offline


-=3Dfx still rox!=-

Posts: 2011
Newcastle U.K.
Gender: male
Re: Need help with my Voodoo2 SLI
Reply #14 - 09.11.06 at 04:09:57
 
Use it as a display model in a glass cabinet or something... ???

...frame it... ???

??? ???
Back to top
 

-=To MOD or not to MOD, that is a DUMB question - just MOD it!=-&&&&+May God stand between you and harm in all the empty places you must walk.+
themadhaxor  
IP Logged
 
Pages: 1 2 3 4
Send Topic Print