I proudly present my new baby
It's a voodoo5 with 4ns memories, swapped from a GF2 asus v7100 pro.

Many thanks to Komponent for this amazing mod !

The card in her glory !





The original cooling is very weak.
With it max overclocking was 192Mhz. Target was at least 200Mhz

The next step was to change the coolers with other ones, bigger.



Notice the black higher coolers.



The results were unfortunately the same...max 192Mhz.

Next step: removing the heatsink !
Card was cooled down in the fridge and heatsink were carefully removed. A lot of emotion in this moment 



I found a lot of nasty paste....





My aluminum cooler


Also with 2x80mm fans no better results were achieved 
Max Overclocking was 193Mhz.

The voltage was set from 2.8V to 3.2V - no change !!!

The card gets very hot, so that a proper cooling is very important !
Below the errors I get ( horizontal lines ):







The next planned step is to use 2 cooper coolers with arctic silver 5 paste
For the rear of the card, I want also to attach a heatsink. Any recommendation for the front and back coolers ?
How far can I go with the voltage rising ? Up to 3.3 V ?

Fell free to comment the project.
Any idea are welcome

Hehe, I added the cooper cooling.
more pictures later

The card is stable with only 2.4V 
I check 4xAA, 2XAA everything is fine, card runs cooler.
Of course, no more than 180Mhz is possible

Thanks Osckhar !

It seems that I choose not the best overclockable voodoo.

Modding is finish !

I manage to mount the cooper coolers.
With this cooper coolers the card could be pushed to 195Mhz. Even if the voltage was rised up to 3.3V, 196Mhz were not possible.



Now was time to improve the cooling on the back of the card.
The area behind the VSA get very hot.
On the back of the card I mount those tiny heatshink.



And, yes ! I reach 200Mhz stable !

Voltage must be 3.26V to run stable.

199Mhz are stable with 3.17V.
201Mhz was no stable even if I rise the voltage to 3.3V.

Here are some benchmakrs results:
CPU was running @2.3Ghz.

@166Mhz:



@200Mhz:

@Osckhar: You reach 198Mhz with the 330 Rev ? Or 220 Rev ?

@ultima: I used for this tests a ECS K7VTA3 board.
I know, is not the best but its the board setup for my v56k.
( dunno why my v56k is not working in the Epox boards but only in the ECS and MSI boards..thats anger me a lot ).

I have here a Epox 8K5A2 and a MSI KT3 ultra, ready to rock and roll

The CPU has gone in the past up to 2.6Ghz, on the Epox board.
Im installing now a fresh XP on the MSI board, with the XP 2600 Mobile.

I am working on an improved cooling solution too, for the back of the VSA-s.

Ill keep you informed my friends !

As Gary sad: Lots of iron in the fire

With Help of Komponent and G1nx  a second card was moded.
Thanks guys !

This time a overclockable voodoo5 was used, witch runs stable before modding @198Mhz.
No more 4ns memory were found, so that i use 4.8ns memories.

The top one is the second





I swap the cooling from the first card, and here it is


( the date from the picture is wrong )

The card runs 200Mhz @3.0V.

204Mhz @3.2V:


205Mhz @3.3V:


206Mhz @3.3V:


Today @3.3V the card run @207Mhz, with open window to cool down the VSA 's cips.
The next step will be to improve the back cooling of the VSA's  by using small cooper plates.
If you have ideas for a better cooling I'll appreciate

Great work Komponent !

@Masterj85: Please let us know mate, what the card is capable to
I cross my finger to reach 210Mhz