Welcome, Guest. Please
Login
Home
Help
Search
Login
3dfx Archive
›
3dfx Section
›
Tech Talk
› Installing heatsink(s) on Voodoo1/2?
(Moderators: gdonovan, FalconFly, NitroX infinity)
‹
Previous Topic
|
Next Topic
›
Pages: 1
Installing heatsink(s) on Voodoo1/2? (Read 137 times)
RaptorZX3
Full Member
Offline
Canadian 3DFX user
Posts: 218
Montreal, Quebec (Canada)
Gender:
Installing heatsink(s) on Voodoo1/2?
23.10.14 at 14:43:00
I wonder if it's worth installing heatsinks on the 2/3 chips of the Voodoo1/2? Do they get hot to a point where i should be worried about the heat? Because i do see some Voodoo1 and 2 cards with heatsink(s) on them, and they came like this from different brands.
I do have a few leftover heatsinks from chipsets and thermal glue i bought on Ebay for cheap.
Back to top
IP Logged
ultima
God Member
Offline
Always searching
Posts: 876
The Netherlands
Gender:
Re: Installing heatsink(s) on Voodoo1/2?
Reply #1 -
23.10.14 at 22:35:58
I have noticed that the faster a system ya put em in, the more they seem to be pushed and get hotter.
I once had a rig with voodoo2 SLI and 3 heatsinks + fans to keep em cool
, but the fans were more for showing off
but it did help me get my voodoo2 to 110Mhz, were those black cards with 110Mhz ram, can't remember the name atm
but that rig was overcooled.....imagine an AT bigtower, at the front a hole cut out with 4 80mm fans as a block for intake...then at the side over the mobo, another hole cut out and 3 x 4 80mm fans as a plate over the mobo and a 220v fan as an exhaust fan.......me didn't need an airco during summer
Back to top
«
Last Edit: 23.10.14 at 22:41:08 by ultima
»
3DFX Playrig:
Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
IP Logged
Pages: 1
‹
Previous Topic
|
Next Topic
›
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
General Section
- News
- General Discussion
3dfx Section
- 3dfx Drivers
- Games
- Tech Talk ««
This & That
- This & That
- Marketplace
- Twilight Zone
« Home
‹ Board
Top of this page
3dfx Archive
» Powered by
YaBB 2.4
!
YaBB
© 2000-2009. All Rights Reserved.