Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 3 4 5 6 
Send Topic Print
Voodoo5 5500 on VIA K8T800Pro ( AGP 4x ) (Read 4040 times)
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #45 - 26.08.07 at 12:36:49
 
thanks for the quick answer IceFire.
Wink
Fact is:
- on a normal Voodoo5, if the A2 is connected to the Ground, the card did not start .
- on a damaged Voodoo5, ( with no Slave VSA ) if the A2 is connected to the Ground the card work flawless with 1.5V, and AGP4x.It's behave like a Voodoo4.

It leads to the following conclusion:
There is something in the SLI configuration, that is not fully optimized for 1.5V ( AGP4x ).

I think that a closer look to an Voodoo5 AGP4x Prototype will give the right answer to our problem.

Br.
Radu.

Unfortunately i was not able to find an AGP4x BIOS.
@ All 3dfx Collectors: Please dump an AGP4x  BIOS for the Projekt. Grin
Maybe is enought to flash only the AGP4x BIOS on the cutted card...has somebody tryed this ????
Back to top
 
WWW m14radu  
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #46 - 26.08.07 at 13:00:41
 
The 5500 AGPx4 boards do not run at AGPx4 mode or at 1.5 volts.
Back to top
 

Rampage is alive!
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #47 - 26.08.07 at 13:07:38
 
Osckar Prototype was not 1.5V ?
Back to top
 
WWW m14radu  
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #48 - 26.08.07 at 13:44:20
 
Quote:
Osckar Prototype was not 1.5V ?

Nope, all my V5 AGP4x noch are 3.3V.

Oscar
Back to top
 
WWW  
IP Logged
 
IceFire
YaBB Newbies
*
Offline


I love YaBB 1G - SP1!

Posts: 13
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #49 - 27.08.07 at 09:12:01
 
that would mean that a2 is not connected to gnd on the agp 4x board.....
the sli problem is only avaible on the 1,5V mode, so the agp 4x prototypes will give us no solution.

...

???
Back to top
 
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #50 - 16.09.07 at 18:30:10
 
Did you manage to contact Hank ?
It's the only person who can help us further !
Wink
Back to top
 
WWW m14radu  
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #51 - 27.12.07 at 10:12:25
 
i need again your help, my Friends..
Wink
i'm searching for a tool that is able to change the AGP voltage from WinXp.
With this i will be able to find the working threshold for the VSA chip, on my Epox Board witch actualy provide 3.3V and it's unfortunately not adjustable.
Roll Eyes



Something interessting here ( page 2 ):

http://www.forumzone.it/topic.asp?whichpage=2&Forum_Title=Hardware+e+software+%2...

"4) AGP 3.3 voltage is only needed by RAM, in primis. If we think to mount the V5 on a AGP8x board, we could cut off the 1.5v pin (useless) and insert an external power supply to power the card. Where could we insert it? The voltage coming from the agp slot ends up to the mosfet on the lower right of the V5, and powers the RAM through internal tracks (connections are not visible from the surface). If we change the voltage in that point, we could change RAM voltage too. This means we could overvolt the RAM directly from the BIOS, if the mainboard allows to modifiy the AGP voltage. Wink"

hmm ..... what u think ?
If i just supply the memories from the 3V Line of the Molex connector, will the card run stable ?





Back to top
« Last Edit: 27.12.07 at 17:03:21 by m14radu »  
WWW m14radu  
IP Logged
 
RaverX
God Member
*****
Offline


Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #52 - 27.12.07 at 17:09:56
 
3V on molex ? Hmmm, I know that there are 5V (red) and 12V (yellow). Anyway, we have 5500 PCI, why try so hard to mod a 5500 AGP to fit in modern mobos, AGP is dead too  Embarrassed

Back to top
 
 
IP Logged
 
exxe
God Member
*****
Offline


^^

Posts: 1316
germany
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #53 - 27.12.07 at 18:01:21
 
S-ATA power have 3,3volts
the orange cable
yellow is 12volts
red 5
black is GND
Back to top
 

...
WWW 233274082  
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #54 - 27.12.07 at 18:15:13
 
hehe,


After reading twice the thread on forumzone.it, regarding the VSA voltmodding, i understand that i miss a point in the entyre Projekt.
Wink
I did not measure the VSA and memory voltage on both platforms , to see the differences.
The card unstability on K8T800 Pro can be explained if the VSA core and/or Memory Voltages are lower than on Epox KT333 board.

So that i installed the Projekt Platform, and do the measurements.
Let me tell u something.
I was 100% sure that on the K8T800 Pro board the VSA and/or memories are supplyed with less Voltage...
Well i was wrong.

On both Platform the Voltages are the same.

VSA - 2.8V
Memories 3.3V.

See in the picture the measurements points.

...

These results show me that not the supply voltages are the Problem...something else.

I did also the following check:
I rise the Vagp on the K8T800 board, from 1.65 V to 1.85V. The VSA and memory voltages were measurured on every VAGP changes and...they remain as above, no changes !


Back to top
 
WWW m14radu  
IP Logged
 
exxe
God Member
*****
Offline


^^

Posts: 1316
germany
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #55 - 27.12.07 at 18:56:22
 
the power menagement parte are neat the power plug
i think the v5 use the power that come direct from the PSU for the Chips and memory
Back to top
 

...
WWW 233274082  
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #56 - 28.12.07 at 07:52:08
 
I have no ideea how to continue.
The same voltages on both Platforms makes me confused. Undecided

Would a VSA core voltage rise to 3.0v help ?  ( also voltmoding )

To Pity that we don't have the card layout, traces and so on...

It remains for the moment the only method, that ciacara uses ( at forumzone.it ).

@Hank: Help !  Wink

Back to top
« Last Edit: 28.12.07 at 07:53:19 by m14radu »  
WWW m14radu  
IP Logged
 
exxe
God Member
*****
Offline


^^

Posts: 1316
germany
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #57 - 28.12.07 at 10:24:24
 
more Vcore = more MHz possible but also many many more heat, you need a better cooling solution

Back to top
 

...
WWW 233274082  
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #58 - 28.12.07 at 13:53:58
 
hmm....i would like to see some picture with this voltmod. ( fur's nachmachen  Grin )
Can somebody post a picture with the modified card area ?
Some advices and result were great too.
Back to top
« Last Edit: 28.12.07 at 13:54:29 by m14radu »  
WWW m14radu  
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: Voodoo5 5500 on VIA K8T800Pro ( AGP 4x )
Reply #59 - 14.08.08 at 17:37:54
 
It's been a while since i did not work on this projekt.

I wold get some free days, and with this ocasion i would like to do a review of the Projekt, in order get a full functionaly V5 AGP4x card.

Any ideas and suggestion would help.

Wink
Back to top
 
WWW m14radu  
IP Logged
 
Pages: 1 2 3 4 5 6 
Send Topic Print