Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 
Send Topic Print
Quantum3D Mercury Brick (Read 1014 times)
szil
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 43
Re: Quantum3D Mercury Brick
Reply #15 - 08.11.10 at 13:04:57
 
I see. What the 125 mhz memori on the card ? Smiley
Back to top
 
 
IP Logged
 
szil
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 43
Re: Quantum3D Mercury Brick
Reply #16 - 08.11.10 at 15:23:58
 
I'm found the vga switch hub cable and cut out Smiley

...

Found all point of the pictures (http://www.thedodgegarage.com/3dfx/q3d_mercury/q3d_merc_pinout_lg.jpg
except the dsub9 pin (2 on mercury top controller board).

The dsub 9 not cable out from my femel dsub connector.


What the 9pin?

Need connect for working the card?


Thx Szil
Back to top
 
 
IP Logged
 
exxe
God Member
*****
Offline


^^

Posts: 1316
germany
Re: Quantum3D Mercury Brick
Reply #17 - 08.11.10 at 17:06:03
 
goriath wrote on 07.11.10 at 23:27:10:
When all the four 200SBi are linked together, the output video is redirect to the Mercury AAlchemy Module (the top controller board) so you must connect the the VGA I/O ports to the module or you must have the Mercury I/O PCB connector that gives three outputs: VGA, S-Video and Composite, just like the 200SBi does.

When a Mercury Brick is assembled, the output from any of the four 200SBi cards is disabled.


no!
on my all four card outputs a picture



you mean pin 9 of the d-sub 15 connector?
for a monitor it is not connected
Back to top
« Last Edit: 08.11.10 at 17:09:01 by exxe »  

...
WWW 233274082  
IP Logged
 
szil
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 43
Re: Quantum3D Mercury Brick
Reply #18 - 08.11.10 at 20:04:59
 
thx view me.

I'm trying the card
http://www.youtube.com/watch?v=6jVoAXSqZoQ

Not start the game and not enable test the card on control panel.

All card working...

I'm dont understand.

What the problem?? Huh

Motherboard not like the 4 card?
Back to top
 
 
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: Quantum3D Mercury Brick
Reply #19 - 08.11.10 at 22:49:17
 
The connector pinout I posted allows you to use a normal Voodoo pass through cable with a 2d card.

Been there and tested that, worked like a charm.
Back to top
 

Rampage is alive!
 
IP Logged
 
goriath
God Member
*****
Offline


Ruggedized Retro Gamer

Posts: 599
Italy/Slovenija
Gender: male
Re: Quantum3D Mercury Brick
Reply #20 - 08.11.10 at 23:45:52
 
exxe wrote on 08.11.10 at 17:06:03:
goriath wrote on 07.11.10 at 23:27:10:
When all the four 200SBi are linked together, the output video is redirect to the Mercury AAlchemy Module (the top controller board) so you must connect the the VGA I/O ports to the module or you must have the Mercury I/O PCB connector that gives three outputs: VGA, S-Video and Composite, just like the 200SBi does.

When a Mercury Brick is assembled, the output from any of the four 200SBi cards is disabled.


no!
on my all four card outputs a picture


Good to know. But since He wasn't able to display picture trough the normal output of the 200SBi cards, I thinked to notice to him that was normal, as stated also in the Gary's site:

Quote:
External VGA connector- Required as the video output connectors on the cards are as dead as a doornail since all rendering output is directed through the AA module up top.
Back to top
 

...
OLD SCHOOL: Because it was done right the first time
 
IP Logged
 
Pages: 1 2 
Send Topic Print