3dfx Archive - Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › General Section › General Discussion › Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x

(Moderators: gdonovan, NitroX infinity, FalconFly)

‹ Previous Topic | Next Topic ›

Pages: 1 2 3 4

Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x (Read 2647 times)

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x Reply #45 - 05.12.16 at 20:43:08 Hello, V5-5500 REV 2300 plus ABIT NF7-S Win98SE now runing stable 4xFSAA for more 1h 3DMark2001SE looping mode. If anyone tried komponent's guide before but it was unstable with lock up then try this update. Feedback needed. Regards, Oscar.
Back to top	« Last Edit: 23.01.17 at 21:20:39 by osckhar » 3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

osckhar

God Member

Offline

www.3Dfx.es

Posts: 812
SPAIN
Gender: male

Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #46 - 07.12.16 at 13:45:22

I tested new rework on a V5 AGP 2100 REV. since @goriath had problems using komponent's guide and with new fix it works perfect too, not lock up. It is tested as well in a V5 AGP 2500 REV.

New PICTURE looping mode V5 AGP 2300 REV runing more than 3h 4xFSAA- I guess is enough for stability prupouse. Cool

Regards,
Oscar.

3Dfx Site - Museo 3Dfx - 3Dfx Collection.&&

IP Logged

anthony YaBB Newbies Offline recent 3dfx enthusiast Posts: 36	Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x Reply #47 - 10.12.16 at 12:46:43 yeah, 4x aa no problem. but looks like no one interested no more in it btw, think between revisions on productions cards there is no difference
Back to top	IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x Reply #48 - 12.12.16 at 13:46:38 Correct @anthony- seems no one is intrested in such mod. Anyway I find it very nice since to run V5 in AGP4x motherboard is very cool.
Back to top	3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

anthony YaBB Newbies Offline recent 3dfx enthusiast Posts: 36	Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x Reply #49 - 12.12.16 at 19:40:45 i found that on bus over 200mhz on 865 system 4x aa mode freeze system on 3dm01 in first test (there is massive texture memory swapping). switching to 1x agp mode not help much. but without aa card works fine even on 265mhz system bus
Back to top	« Last Edit: 12.12.16 at 19:43:16 by anthony » IP Logged

osckhar

God Member

Offline

www.3Dfx.es

Posts: 812
SPAIN
Gender: male

Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #50 - 13.12.16 at 12:39:21

Quote:

i found that on bus over 200mhz on 865 system 4x aa mode freeze system on 3dm01 in first test (there is massive texture memory swapping). switching to 1x agp mode not help much. but without aa card works fine even on 265mhz system bus

@anthony- what motherboard are you using? I guess with your V5 A2 AGP4x over 200MHz and 4xFSAA does not lock up in same system, correct? I only tested cards @185MHz 4xFSAA and everything correct. Setting AGP1x mode did not help?

Can you test same card in one system with AGP3.3v and 4xFSAA @200MHz? Not sure if such set up can be very stressing and hot for whole card causing too much heat and locking the card. In my O/C tests card never reach same speed wth FSAA and not FSAA.

Anyway 200MHz is a nice speed- did you use VMod?

Regards,
Oscar.

3Dfx Site - Museo 3Dfx - 3Dfx Collection.&&

IP Logged

osckhar God Member Offline www.3Dfx.es Posts: 812 SPAIN Gender:	Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x Reply #51 - 14.12.16 at 13:27:22 OFF TOPIC Received a batch for modding cards- I liked the picture. Now I can test how perform V5 A2 AGP4x over 200MHz since this card at default with toshiba memory tsop dont like O/C over 185MHz. Regards, Oscar.
Back to top	« Last Edit: 14.12.16 at 13:37:02 by osckhar » 3Dfx Site - Museo 3Dfx - 3Dfx Collection.&& IP Logged

Pages: 1 2 3 4

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page