Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 3 4 
Send Topic Print
Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x (Read 2603 times)
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #45 - 05.12.16 at 20:43:08
 
Hello,

V5-5500 REV 2300 plus ABIT NF7-S Win98SE now runing stable 4xFSAA for more 1h 3DMark2001SE looping mode.

...

If anyone tried komponent's guide before but it was unstable with lock up then try this update. Feedback needed.

Regards,
Oscar.
Back to top
« Last Edit: 23.01.17 at 21:20:39 by osckhar »  
WWW  
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #46 - 07.12.16 at 13:45:22
 
I tested new rework on a V5 AGP 2100 REV.  since @goriath had problems using komponent's guide and with new fix it works perfect too, not lock up. It is tested as well in a V5 AGP 2500 REV.

New PICTURE looping mode V5 AGP 2300 REV runing more than 3h 4xFSAA- I guess is enough for stability prupouse.  Cool

...

Regards,
Oscar.
Back to top
 
WWW  
IP Logged
 
anthony
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 36
Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #47 - 10.12.16 at 12:46:43
 
yeah, 4x aa no problem. but looks like no one interested no more in it

btw, think between revisions on productions cards there is no difference
Back to top
 
 
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #48 - 12.12.16 at 13:46:38
 
Correct @anthony- seems no one is intrested in such mod.  Anyway I find it very nice since to run V5 in AGP4x motherboard is very cool.  Cool
Back to top
 
WWW  
IP Logged
 
anthony
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 36
Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #49 - 12.12.16 at 19:40:45
 
i found that on bus over 200mhz on 865 system 4x aa mode freeze system on 3dm01 in first test (there is massive texture memory swapping). switching to 1x agp mode not help much. but without aa card works fine even on 265mhz system bus
Back to top
« Last Edit: 12.12.16 at 19:43:16 by anthony »  
 
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #50 - 13.12.16 at 12:39:21
 
Quote:
i found that on bus over 200mhz on 865 system 4x aa mode freeze system on 3dm01 in first test (there is massive texture memory swapping). switching to 1x agp mode not help much. but without aa card works fine even on 265mhz system bus


@anthony- what motherboard are you using? I guess with your V5 A2 AGP4x over 200MHz and 4xFSAA does not lock up in same system, correct?  I only tested cards @185MHz 4xFSAA and everything correct. Setting AGP1x mode did not help?

Can you test same card in one system with AGP3.3v and 4xFSAA @200MHz? Not sure if such set up can be very stressing and hot for whole card causing too much heat and locking the card. In my O/C tests  card never reach same speed wth FSAA and not FSAA.

Anyway 200MHz is a nice speed- did you use VMod?

Regards,
Oscar.
Back to top
 
WWW  
IP Logged
 
osckhar
God Member
*****
Offline


www.3Dfx.es

Posts: 812
SPAIN
Gender: male
Re: Voodoo5 5500 mod from 3.3v only to 1.5v only AGP4x
Reply #51 - 14.12.16 at 13:27:22
 
OFF TOPIC

Received a batch for modding cards- I liked the picture.

...

Now I can test how perform V5 A2 AGP4x over 200MHz since this card at default with toshiba memory tsop dont like O/C over 185MHz.

Regards,
Oscar.
Back to top
« Last Edit: 14.12.16 at 13:37:02 by osckhar »  
WWW  
IP Logged
 
Pages: 1 2 3 4 
Send Topic Print