Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
3D Blaster Banshee: Windows protection error. (Read 156 times)
RaptorZX3
Full Member
***
Offline


Canadian 3DFX user

Posts: 218
Montreal, Quebec (Canada)
Gender: male
3D Blaster Banshee: Windows protection error.
24.11.13 at 20:08:53
 
I tried 2 different drivers (Win98SE) to use with this 3D Blaster Banshee PCI i found (original Creative drivers, and Raziel's) and both give me this error:
Quote:
While initializing device CONFIGMG:
Windows Protection Error. You need to restart your computer.


I tried many ways but it doesn't seem to work...though it does detect the card  and show "Creative 3D Blaster Banshee 16mb SDRAM" at boot-up.

Is this card dead or something?
Back to top
 

...
the_raptor(remove_this)@videotron.ca  
IP Logged
 
RaverX
God Member
*****
Offline


Voodoo2 fan

Posts: 533
Oradea, Romania
Gender: male
Re: 3D Blaster Banshee: Windows protection error.
Reply #1 - 24.11.13 at 21:54:37
 
PCI videocards can make some problems, I had similar problems with some TNT PCI cards, it's a incompatibity with the motherboard.

Try to boot with another videocard and uninstall all banshee drivers, then start again with the banshee pci card and see if it boots. If it boots it's ok, but then install the drivers, you might get the problem after that.
Back to top
 
 
IP Logged
 
RaptorZX3
Full Member
***
Offline


Canadian 3DFX user

Posts: 218
Montreal, Quebec (Canada)
Gender: male
Re: 3D Blaster Banshee: Windows protection error.
Reply #2 - 24.11.13 at 22:02:38
 
well it's true that the board is pretty cheap, it's an Asus MEW-AM (it was inside a HP build i believe), no AGP, and seem to lack some features as well, like no ACPI for a regular Windows 2000 SP4 installation...

The included Banshee drivers seem to work on Windows 2000, but i have to select one of the "2"(?) Banshee in the setup program (where there's one). I tried updating the drivers, and it bugged Windows...

So i might try with another board, yeah...
Back to top
« Last Edit: 24.11.13 at 22:04:24 by RaptorZX3 »  

...
the_raptor(remove_this)@videotron.ca  
IP Logged
 
Thandor
Full Member
***
Offline


What's the fuzz all about?

Posts: 226
Re: 3D Blaster Banshee: Windows protection error.
Reply #3 - 25.11.13 at 08:51:09
 
Try installing the motherboard drivers first and then the Banshee drivers (Or vice-versa in case it doesn't work).
Back to top
 
WWW  
IP Logged
 
RaptorZX3
Full Member
***
Offline


Canadian 3DFX user

Posts: 218
Montreal, Quebec (Canada)
Gender: male
Re: 3D Blaster Banshee: Windows protection error.
Reply #4 - 25.11.13 at 15:07:16
 
Windows 2000's default Banshee driver seemed to work, but updating the drivers just screw it up.

Now i have problems on this other board (Asus P2B) installing Windows 2000, probably because the board wasn't made for it?

The Banshee's drivers seem to have problems in Windows 98...i'll have to try again on another board, i have a MSI MS-6156VA here.
Back to top
 

...
the_raptor(remove_this)@videotron.ca  
IP Logged
 
RaptorZX3
Full Member
***
Offline


Canadian 3DFX user

Posts: 218
Montreal, Quebec (Canada)
Gender: male
Re: 3D Blaster Banshee: Windows protection error.
Reply #5 - 25.11.13 at 17:23:21
 
i tried this Banshee card on an AthlonXP board (Asus A7N8X) with Windows XP installed, it detect it and it doesn't seem to have problem...yet.

Back to top
 

...
the_raptor(remove_this)@videotron.ca  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print