3dfx Archive - 3dfx Voodoo5 6000 Legend WaterCooling Edition

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	3dfx Voodoo5 6000 Legend WaterCooling Edition 09.02.12 at 03:53:44 New project : Voodoo5 6000 rev.3700A WaterCooling edition . Step by step : - Waterblocks : That is the coding that allows the machine to make that logo on front waterblock Delrin + Copper ... In Development ...
Back to top	« Last Edit: 30.05.12 at 16:35:50 by trevormacro » IP Logged

Quaker763 Junior Member Offline It really is kind of ridiculous Posts: 67 Australia Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #1 - 09.02.12 at 11:28:22 Soooo it's going to have a 3Dfx logo waterblock?? That will look VERY badass Hope to see more pics soon
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #2 - 09.02.12 at 11:41:31 Quaker763 wrote on 09.02.12 at 11:28:22: Soooo it's going to have a 3Dfx logo waterblock?? That will look VERY badass Hope to see more pics soon Thank you one picture updated. I just customize one front waterblock. I want to write "3dfx Voodoo5 6000" on it.
Back to top	IP Logged

Loeschzwerg Senior Member Offline AAlchemy PSU maker :-) Posts: 396 Germany -> Bavaria -> Augsburg Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #3 - 09.02.12 at 12:09:16 Now this is a useful modification Front and Back water-block? Does not make sense to me. The front solution should be enough, I don't think that the memory on the back need to be cooled. Who is doing the solution for you? -> http://liquid-extasy.de ???
Back to top	IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #4 - 09.02.12 at 12:21:05

Loeschzwerg wrote on 09.02.12 at 12:09:16:

Now this is a useful modification

Front and Back water-block? Does not make sense to me. The front solution should be enough, I don't think that the memory on the back need to be cooled.

Who is doing the solution for you? -> http://liquid-extasy.de ???

I need to dissipate heat from :

- Front and Back VSA-100
- Front and Back Sdrams
- Hint chip

It's really important to extract heat from both sides of the card
otherwise it will not cool very well.
It's not http://liquid-extasy.de.
Thanks for your support Wink

Back to top

« Last Edit: 09.02.12 at 12:24:01 by trevormacro »

IP Logged

Loeschzwerg

Senior Member

Offline

AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male

Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #5 - 09.02.12 at 13:34:09

Does the memory get that warm?

Cooling HiNT -> Check
Cooling VSA100 -> Check

I can't imagine that the sdram is a problem.

I think the front cooling is enough also for the VSA100. A good water-cooling does have enough power for heat dissipation.

Will the front and the back cooler be separate parts so each can work for themselves?

Back to top

IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #6 - 09.02.12 at 14:15:48

Loeschzwerg wrote on 09.02.12 at 13:34:09:

Does the memory get that warm?

Cooling HiNT -> Check
Cooling VSA100 -> Check

I can't imagine that the sdram is a problem.

I think the front cooling is enough also for the VSA100. A good water-cooling does have enough power for heat dissipation.

Will the front and the back cooler be separate parts so each can work for themselves?

The sdrams creat heat like gpu and hint chip.
I think the front and back waterblocks will be joined to work together.

Back to top

IP Logged

m14radu God Member Offline Take your chance ! Posts: 555 Timisoara, Romania Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #7 - 09.02.12 at 20:04:11 Good Work again Michael ! Keep it up
Back to top	IP Logged

trevormacro God Member Offline Voodoo5k6 Gold SE, Legend & Mystical Edition Posts: 622 Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #8 - 11.02.12 at 00:53:48 Voodoo5 6000 heatsinks removed
Back to top	IP Logged

Kokohemmo

YaBB Newbies

Offline

Posts: 47

Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #9 - 11.02.12 at 02:30:21

Hi trevormacro

hmm.. since you have allready remove those heatsinks, why you don't use peltier instead of water ? Water and computers do not fit in my opinion in same case.. Wink

If I was you and willing to get maximium of that card, I would use peltier elements. Messing with water do not help.

All you need is to isolate the back of the card, because it is otherwise in ice... Also needed 4 "cold plates" aluminium is good and ofcourse 4 peltier elements, 80 watts 40*40 elements.
In the "hot" side of peltiers you allready have that massive cooler, what I have seen in your pictures. That should work ok.

I remember when I use Peltier in Celeron 300 and I managed it running in 600 Mhz ... Wink

Regards
Kokohemmo

Back to top

Epox 8K3A+
Athlon XP 3200+ 333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card

IP Logged

Quaker763 Junior Member Offline It really is kind of ridiculous Posts: 67 Australia Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #10 - 11.02.12 at 03:04:15 Quote: I want to write "3dfx Voodoo5 6000" on it. Hmm, I think it'd look nicer with just 3dfx on it. Maybe in a red colour as well?? Or maybe just have 3Dfx on the front and Voodoo 5 6000 on the back?
Back to top	IP Logged

Kokohemmo YaBB Newbies Offline Posts: 47	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #11 - 11.02.12 at 03:09:37 Hi trevo.. PM sent.... Regards Kokohemmo
Back to top	Epox 8K3A+ Athlon XP 3200+ 333Mhz @ 2.33Ghz 3dfx Voodoo5 6000 Rev. 3700A 2 x 1GB Kingston ValueRAM PC2700 CL 2.5 2 x WD Caviar SE 160GB 7200RPM (RAID 0) Realtek Family Network card IP Logged

NitroX infinity YaBB Moderator Offline Posts: 1936 The Netherlands Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #12 - 11.02.12 at 12:13:47 Why would you put peltier elements on the card? You'd spend 320Watts cooling a card that probably doesn't consume more than a quarter of that.
Back to top	My Blog IP Logged

oldskool Senior Member Offline I Love 3dfx Posts: 398 uk Gender:	Re: 3dfx Voodoo5 6000 WaterCooling Edition Reply #13 - 11.02.12 at 12:47:21 NitroX infinity wrote on 11.02.12 at 12:13:47: Why would you put peltier elements on the card? You'd spend 320Watts cooling a card that probably doesn't consume more than a quarter of that. To run the card at sub zero tempretures perhaps!
Back to top	Epox 8K3A+/AMD 2700/1GB RAM/3dfx 5500 agp/Hercules Prophetview 920 IP Logged

trevormacro

God Member

Offline

Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male

Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #14 - 11.02.12 at 12:53:03

@Kokohemmo :

Hi,
I prefer to use watercooling for this card.
I think the max O/C for one v5k6 if heat is very good dissipate is 220 MHz because there is a limit of VSA-100 chip on rev.3700A.
I already start to buy all part for a watercooling kit.
We will see the results of this project.

@Quaker763 :

I just write on front waterblock 3dfx Voodoo5 6000. I don't think yet about colors.
I let you know.

Back to top

« Last Edit: 11.02.12 at 12:54:13 by trevormacro »

IP Logged

	Welcome, Guest. Please Login