Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 3 ... 8
Send Topic Print
3dfx Voodoo5 6000 Legend WaterCooling Edition (Read 9924 times)
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
3dfx Voodoo5 6000 Legend WaterCooling Edition
09.02.12 at 03:53:44
 
New project :
Voodoo5 6000 rev.3700A WaterCooling edition
.

...

...

Step by step :

- Waterblocks :

That is the coding that allows the machine to make that logo on front waterblock

...

Delrin + Copper

...


... In Development ...
Back to top
« Last Edit: 30.05.12 at 16:35:50 by trevormacro »  
 
IP Logged
 
Quaker763
Junior Member
**
Offline


It really is kind of ridiculous

Posts: 67
Australia
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #1 - 09.02.12 at 11:28:22
 
Soooo it's going to have a 3Dfx logo waterblock?? That will look VERY badass  Wink  Wink Wink

Hope to see more pics soon
Back to top
 
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #2 - 09.02.12 at 11:41:31
 
Quaker763 wrote on 09.02.12 at 11:28:22:
Soooo it's going to have a 3Dfx logo waterblock?? That will look VERY badass  Wink  Wink Wink

Hope to see more pics soon


Thank you Wink one picture updated.
I just customize one front waterblock.
I want to write "3dfx Voodoo5 6000" on it.
Back to top
 
 
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #3 - 09.02.12 at 12:09:16
 
Now this is a useful modification Smiley

Front and Back water-block? Does not make sense to me. The front solution should be enough, I don't think that the memory on the back need to be cooled.

Who is doing the solution for you? -> http://liquid-extasy.de ???

Back to top
 
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #4 - 09.02.12 at 12:21:05
 
Loeschzwerg wrote on 09.02.12 at 12:09:16:
Now this is a useful modification Smiley

Front and Back water-block? Does not make sense to me. The front solution should be enough, I don't think that the memory on the back need to be cooled.

Who is doing the solution for you? -> http://liquid-extasy.de ???



I need to dissipate heat from :

- Front and Back VSA-100
- Front and Back Sdrams
- Hint chip

...

...

It's really important to extract heat from both sides of the card
otherwise it will not cool very well.
It's not http://liquid-extasy.de.
Thanks for your support Wink
Back to top
« Last Edit: 09.02.12 at 12:24:01 by trevormacro »  
 
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #5 - 09.02.12 at 13:34:09
 
Does the memory get that warm?

Cooling HiNT -> Check
Cooling VSA100 -> Check

I can't imagine that the sdram is a problem.

I think the front cooling is enough also for the VSA100. A good water-cooling does have enough power for heat dissipation.

Will the front and the back cooler be separate parts so each can work for themselves?
Back to top
 
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #6 - 09.02.12 at 14:15:48
 
Loeschzwerg wrote on 09.02.12 at 13:34:09:
Does the memory get that warm?

Cooling HiNT -> Check
Cooling VSA100 -> Check

I can't imagine that the sdram is a problem.

I think the front cooling is enough also for the VSA100. A good water-cooling does have enough power for heat dissipation.

Will the front and the back cooler be separate parts so each can work for themselves?


The sdrams creat heat like gpu and hint chip.
I think the front and back waterblocks will be joined to work together.
Back to top
 
 
IP Logged
 
m14radu
God Member
*****
Offline


Take your chance !

Posts: 555
Timisoara, Romania
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #7 - 09.02.12 at 20:04:11
 
Good Work again Michael !

Keep it up  Wink
Back to top
 
WWW m14radu  
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #8 - 11.02.12 at 00:53:48
 
Voodoo5 6000 heatsinks removed

...
Back to top
 
 
IP Logged
 
Kokohemmo
YaBB Newbies
*
Offline



Posts: 47
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #9 - 11.02.12 at 02:30:21
 
Hi trevormacro

hmm.. since you have allready remove those heatsinks, why you don't use peltier instead of water ? Water and computers do not fit in my opinion in same case.. Wink

If I was you and willing to get maximium of that card, I would use peltier elements. Messing with water do not help.

All you need is to isolate the back of the card, because it is otherwise in ice... Also needed 4 "cold plates" aluminium is good and ofcourse 4 peltier elements, 80 watts 40*40 elements.
In the "hot" side of peltiers you allready have that massive cooler, what I have seen in your pictures. That should work ok.

I remember when I use Peltier in Celeron 300 and I managed it running in 600 Mhz ... Wink


Regards
Kokohemmo
Back to top
 

Epox 8K3A+
Athlon XP 3200+  333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card
 
IP Logged
 
Quaker763
Junior Member
**
Offline


It really is kind of ridiculous

Posts: 67
Australia
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #10 - 11.02.12 at 03:04:15
 
Quote:
I want to write "3dfx Voodoo5 6000" on it.


Hmm, I think it'd look nicer with just
3dfx
on it. Maybe in a red colour as well?? Or maybe just have 3Dfx on the front and Voodoo 5 6000 on the back?

Cheesy
Back to top
 
 
IP Logged
 
Kokohemmo
YaBB Newbies
*
Offline



Posts: 47
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #11 - 11.02.12 at 03:09:37
 
Hi trevo..


PM sent....


Regards
Kokohemmo
Back to top
 

Epox 8K3A+
Athlon XP 3200+  333Mhz @ 2.33Ghz
3dfx Voodoo5 6000 Rev. 3700A
2 x 1GB Kingston ValueRAM PC2700 CL 2.5
2 x WD Caviar SE 160GB 7200RPM (RAID 0)
Realtek Family Network card
 
IP Logged
 
NitroX infinity
YaBB Moderator
*****
Offline



Posts: 1936
The Netherlands
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #12 - 11.02.12 at 12:13:47
 
Why would you put peltier elements on the card? You'd spend 320Watts cooling a card that probably doesn't consume more than a quarter of that. Huh
Back to top
 
WWW  
IP Logged
 
oldskool
Senior Member
****
Offline


I Love 3dfx

Posts: 398
uk
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #13 - 11.02.12 at 12:47:21
 
NitroX infinity wrote on 11.02.12 at 12:13:47:
Why would you put peltier elements on the card? You'd spend 320Watts cooling a card that probably doesn't consume more than a quarter of that. Huh


To run the card at sub zero tempretures perhaps!
Back to top
 

Epox 8K3A+/AMD 2700/1GB RAM/3dfx 5500 agp/Hercules Prophetview 920
 
IP Logged
 
trevormacro
God Member
*****
Offline


Voodoo5k6 Gold SE, Legend
& Mystical Edition

Posts: 622
Gender: male
Re: 3dfx Voodoo5 6000 WaterCooling Edition
Reply #14 - 11.02.12 at 12:53:03
 
@Kokohemmo :

Hi,
I prefer to use watercooling for this card.
I think the max O/C for one v5k6 if heat is very good dissipate is 220 MHz because there is a limit of VSA-100 chip on rev.3700A.
I already start to buy all part for a watercooling kit.
We will see the results of this project.

@Quaker763 :

I just write on front waterblock 3dfx Voodoo5 6000. I don't think yet about colors.
I let you know.
Back to top
« Last Edit: 11.02.12 at 12:54:13 by trevormacro »  
 
IP Logged
 
Pages: 1 2 3 ... 8
Send Topic Print