3dfx Archive - Voodoo1 Problems

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Games › Voodoo1 Problems

(Moderators: FalconFly, gdonovan, NitroX infinity)

‹ Previous Topic | Next Topic ›

Pages: 1

Voodoo1 Problems (Read 229 times)

P200

Junior Member

Offline

Viva Chile Mierda!!!

Posts: 54
Santiago, Chile
Gender: male

Voodoo1 Problems
28.06.03 at 21:01:33

Hi again people! Cheesy

This is my problem...
I`ve bought an old (but cool) Voodoo1 a couple of days ago. Well, when i try to run games (ALL games, as Glide games or D3D games) the card doesn`t initiate Cry

(the screen comes black) and nothing happen. Windows recognize perfectly at start (PCI Multimedia Video Device Detected) and i install the latest drivers available. Then i restart and when i try to view the properties of V1 the system hangs, or when i try to run DXDiag (I use DX 8.1) too. I`ve tried to change from pci slot, but nothing happen. BUT, i remember when i was trying to run NFS3 IT RUNS! Cheesy

(1 time of 34 attempts). What`s going on? ??? Can be possible what my Voodoo1 is damaged or similar? Really i`d like to run games on this litte jewel Grin

. Other thing: My V2 runs perfectly, then why my V1 doesn`t do?

Gratefully
Renato Tapia (CHI)

IP Logged

FalconFly

YaBB Administrator

Offline

3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male

Re: Voodoo1 Problems
Reply #1 - 29.06.03 at 03:22:54

Hmm...

Are you using the Voodoo1 in the same System as your Voodoo2 ?

If so, you'll need to carefully remove (newer Voodoo2 Drivers have an internal feature) old 3dfx Drivers before.

Otherwise, when the Voodoo2 is removed and the Voodoo1 installed, this can lead to a mixup in Drivers on your System, rendering the Voodoo1 hardly functional.
(Voodoo1 and Voodoo2 core files mostly have similar names, thus they can conflict).

And of course, you sure don't attempt to use Voodoo1 and Voodoo2 in your System at the same time ?

Also, what are your system specs ?
(Voodoo1/2 are known to have problems in some modern machines)

« Last Edit: 29.06.03 at 03:23:31 by FalconFly »

WebMaster FalconFly Central 3dfx Archive

IP Logged

P200 Junior Member Offline Viva Chile Mierda!!! Posts: 54 Santiago, Chile Gender:	Re: Voodoo1 Problems Reply #2 - 01.07.03 at 21:31:50 I have uninstalled my Voodoo2 and ALL the dll`s relationed whit the V2, but the V1 doesn`t work anyway... My system is a poor Pentium 200 w/64 ram, hdd 4.3 and a Trident 9440 as a 2D card. DX 8.1. Greetings!
Back to top	IP Logged

FalconFly

YaBB Administrator

Offline

3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male

Re: Voodoo1 Problems
Reply #3 - 01.07.03 at 23:18:30

Hm, you could check the Temperature of the Card.

Some older Cards might be damaged, running, but on very high temperatures (but this is usually only experiences on very modern machines sometimes due to a bug)

Also, you might look into the Bios, and set anything Video Related to more conservative parameters...

Apart from that, I very well remember the "Black Screen upon accessing the Card's Display Properties" syndrome, but I don't remember an exact cause.
For as long as the Cables are routed correctly, it should work...

WebMaster FalconFly Central 3dfx Archive

IP Logged

P200 Junior Member Offline Viva Chile Mierda!!! Posts: 54 Santiago, Chile Gender:	Re: Voodoo1 Problems Reply #4 - 03.07.03 at 02:45:26 ok thanks
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page