Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Drivers needed -> Primary Image LTD - Barracuda (Read 152 times)
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Drivers needed -> Primary Image LTD - Barracuda
23.09.12 at 15:27:38
 
Hi everyone,

I fixed the Primary Image Barracuda from exxe and also build a small adapter for power supply.

The card can be seen in the device manager, but I need the drivers to further test the card. Does someone have these?

Here pictures of the card and my repair:

... ... -> The Barracuda
...
... ... -> the card in detailed view
... ...
... ... -> The card does have an extra PCB for powersupply. It needs 5V and 6A connected to the 4pin connector on the rear.
...
... -> Quartz crystal on back is broken... It's a normal quartz with 14.318MHz

-----

... -> new quartz
... -> Solderpads cleaned
... ... ... -> new quartz soldered

-----

My selfmade molex adapter to provide the card with the needed powersupply.

... ...
... -> The right two pins (yellow) are 5V and the black ones are ground.
... ... -> The card shown under Everest Ultimate

So if anyone does have the drivers please share them Smiley

Regards,
Löschzwerg
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print