3dfx Archive - Voodoo 5 and diagonal lines on monitor

	Welcome, Guest. Please Login

Home

Help

3dfx Archive › 3dfx Section › Tech Talk › Voodoo 5 and diagonal lines on monitor

(Moderators: NitroX infinity, FalconFly, gdonovan)

‹ Previous Topic | Next Topic ›

Pages: 1

Voodoo 5 and diagonal lines on monitor (Read 227 times)

bruter

YaBB Newbies

Offline

Posts: 6

Voodoo 5 and diagonal lines on monitor
27.10.03 at 18:37:58

Hello, I have just joined your forum. I recently upgraded my Voodoo 3 for a Voodoo 5 5500 AGP. A few days ago light gray diagonal lines appeared on my monitor after a few hours of operation. There is also a wide horizontal band that scrolls down the screen as well. I suspect that the 5500 is responsible but maybe it's just a setting?

Any feedback on this issue would be greatly appreciated!

IP Logged

bruter YaBB Newbies Offline Posts: 6	Re: Voodoo 5 and diagonal lines on monitor Reply #1 - 27.10.03 at 19:22:21 The card is not overclocked to my knowledge. The person I purchased the card from also said that it was never overclocked.
Back to top	IP Logged

FalconFly

YaBB Administrator

Offline

3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male

Re: Voodoo 5 and diagonal lines on monitor
Reply #2 - 27.10.03 at 20:24:08

Hm, if your Voodoo5 is a used, 2nd hand one, check that both fans are

a) still working and
b) that the Coolers beneath the Fans are clear of dust

When I cleaned my Voodoo5's, I found the Fans were working fine, but the amount of dust accumulated on the Coolers itself were decreasing the Cooling efficiency quite alot, making the Chips run very hot Tongue

(The Fans can be easily taken off by removing the 4 little screws. That makes cleaning the Cooler itself very easy)

« Last Edit: 27.10.03 at 20:24:32 by FalconFly »

WebMaster FalconFly Central 3dfx Archive

IP Logged

bruter YaBB Newbies Offline Posts: 6	Re: Voodoo 5 and diagonal lines on monitor Reply #3 - 28.10.03 at 00:09:28 Great, thanks a bunch. I will remove the card and check its cleanliness. As for the "downclocking", how would I go about doing this. (Sorry, never touched those settings before!)
Back to top	IP Logged

bruter YaBB Newbies Offline Posts: 6	Re: Voodoo 5 and diagonal lines on monitor Reply #4 - 28.10.03 at 03:27:55 Well, I took the fans off and , there was a lot of dust on the coolers. So, I cleaned the coolers and fans and I guess now we'll just wait and see. Thanks FalconFly!!
Back to top	IP Logged

beta

Ex Member

Re: Voodoo 5 and diagonal lines on monitor
Reply #5 - 28.10.03 at 14:33:07

Win9x has the overclocking tab, you can download a small .exe that will enable it for you. 'overclock.exe'.

As patience is saying if the problem continues you'll need to clock below default, this will establish if there is a temperature issue or not. Though usually overheating causes complete lock up and static vertical stipes or a freeze with looping sound in games, in my experience. Your diagonal stipes with scrolling horizontal bar is a new one on me... hopefully someone else may have seen this symptom before. Doesn't sound like a problem with the SDRAM either...

IP Logged

bruter YaBB Newbies Offline Posts: 6	Re: Voodoo 5 and diagonal lines on monitor Reply #6 - 28.10.03 at 15:10:18 The driver I am using is the Amigamerlin V. 2.9 for Win 9x. I don't have the overclock tab.
Back to top	IP Logged

beta Ex Member	Re: Voodoo 5 and diagonal lines on monitor Reply #7 - 28.10.03 at 17:25:49 Quote: ...you can download a small .exe that will enable it for you. 'overclock.exe'. You will find it here. You can also adjust the clock from 3dfx tools with Amigamerlin 2.9.
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page