Welcome, Guest. Please Login 3dfx Archive
 
 
  HomeHelpSearchLogin  
 
  3dfx Archive › This & That › Marketplace › Mercury I/O Cable *Transaction Complete*
(Moderators: FalconFly, NitroX infinity, gdonovan)
‹ Previous Topic | Next Topic ›
Pages: 1 ... 5 6 7 8 9 10
Send Topic Print
Mercury I/O Cable *Transaction Complete* (Read 3109 times)
gamma742
God Member
*****
Offline


3Dfx Gamer

Posts: 1668
San Diego, CA  USA
Gender: male
Re: [S] Mercury I/O Cable
Reply #90 - 11.12.05 at 18:47:38  
Are you using a 40 pin IDE or a 80 Ultra ATA cable?

Is there anything else on the IDE bus (cable)?

Check the strapping on the drive Master/Slave/Cable Select.



Try another drive. Try another cable.

What is the BIOS version on the MB, Maybe it can't detect you drive correctly (newer larger drive possibly too large)?


I think it's a hardware issue. Keep the same motherboard in and lets start swapping out some drives cable and stuff. Put the drive on the bus by itself (CDrom on the secondary IDE).



Sorry for all the questions. I trying to get a feel for what's going on. Some of the question are pretty basic but it helps me visualize the situation.
Back to top
 
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System.  Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best......
gamma742 https://www.facebook.com/bob.waller  
IP Logged
 
TM30
God Member
*****
Offline



Posts: 1108
Germany
Gender: male
Re: [S] Mercury I/O Cable
Reply #91 - 11.12.05 at 19:28:03  
i use an 80pin cable for the hdd and a 40pin for the cdrom

both devices set as master, both have a seperate ide channel

bios version i have to check
Back to top
 
 
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: [S] Mercury I/O Cable
Reply #92 - 11.12.05 at 19:51:13  
Quote:
i use an 80pin cable for the hdd and a 40pin for the cdrom


Should make no difference as the GX chipset is ATA-33.

Might not hurt going to the 40 strand cable for the HD though to be safe.
Back to top
 
Rampage is alive!
 
IP Logged
 
gamma742
God Member
*****
Offline


3Dfx Gamer

Posts: 1668
San Diego, CA  USA
Gender: male
Re: [S] Mercury I/O Cable
Reply #93 - 11.12.05 at 21:31:31  
What's the drive size?
Back to top
 
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System.  Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best......
gamma742 https://www.facebook.com/bob.waller  
IP Logged
 
TM30
God Member
*****
Offline



Posts: 1108
Germany
Gender: male
Re: [S] Mercury I/O Cable
Reply #94 - 11.12.05 at 22:06:17  
8GB Seagate
Back to top
 
 
IP Logged
 
gamma742
God Member
*****
Offline


3Dfx Gamer

Posts: 1668
San Diego, CA  USA
Gender: male
Re: [S] Mercury I/O Cable
Reply #95 - 11.12.05 at 22:54:08  
Should be no problem there ???

If I were you, I would use http://www.mbhs.edu/~jaosborn/boot98se.exe Boot from it and run Fdisk and delete all partitions then create 2 partitions both using FAT 16 (say no to large disk support) C: = 2GB, D: = 2 GB. then install Win98SE to the C: Then install Windows NT4 to the D: This will automatically create a "Dual Boot" system.

We have to get NT4 or Win2K on this machine if you ever want the Mercury sub-System to function.
Back to top
« Last Edit: 11.12.05 at 22:59:58 by gamma742 »  
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System.  Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best......
gamma742 https://www.facebook.com/bob.waller  
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: [S] Mercury I/O Cable
Reply #96 - 11.12.05 at 23:12:53  
Quote:
We have to get NT4 or Win2K on this machine if you ever want the Mercury sub-System to function.


Win2k won't give you the display tab for Mercury, only NT4.
Back to top
 
Rampage is alive!
 
IP Logged
 
gamma742
God Member
*****
Offline


3Dfx Gamer

Posts: 1668
San Diego, CA  USA
Gender: male
Re: [S] Mercury I/O Cable
Reply #97 - 11.12.05 at 23:26:55  
Quote:
Win2k won't give you the display tab for Mercury, only NT4.





Good point. Try to stay with NT4. You DO want to see this Tab, go to reply 24 & 26 towards the bottom of this page... http://www.falconfly-central.de/cgi-bin/yabb/YaBB.pl?board=market;action=display...
Back to top
« Last Edit: 11.12.05 at 23:27:51 by gamma742 »  
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System.  Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best......
gamma742 https://www.facebook.com/bob.waller  
IP Logged
 
TM30
God Member
*****
Offline



Posts: 1108
Germany
Gender: male
Re: [S] Mercury I/O Cable
Reply #98 - 12.12.05 at 11:09:13  
i remember, i once did get a win nt running on this board... (but i had many tries to get it working...) At this time i did not have your aa cap...

then i formatted the drive because i needed it in another PC...

<-- me stupid  Roll Eyes
Back to top
« Last Edit: 12.12.05 at 11:09:38 by TM30 »  
 
IP Logged
 
gamma742
God Member
*****
Offline


3Dfx Gamer

Posts: 1668
San Diego, CA  USA
Gender: male
Re: [S] Mercury I/O Cable
Reply #99 - 12.12.05 at 18:13:32  
If shipping "From" Germany wasn't so expensive I would have you to ship it to me or Gary for testing.

Well if all else fails, you could always buy my Complete Mercury System Lips Sealed
Back to top
 
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System.  Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best......
gamma742 https://www.facebook.com/bob.waller  
IP Logged
 
FalconFly
YaBB Administrator
*****
Offline


3dfx Archivist

Posts: 2445
5335N 00745E
Gender: male
Re: [S] Mercury I/O Cable
Reply #100 - 12.12.05 at 20:17:43  
Off-Topic note :

Wow, more than three months now... you really got a complicated nut to crack there Wink
Back to top
 
WWW  
IP Logged
 
gamma742
God Member
*****
Offline


3Dfx Gamer

Posts: 1668
San Diego, CA  USA
Gender: male
Re: [S] Mercury I/O Cable
Reply #101 - 12.12.05 at 23:47:33  
Quote:
Off-Topic note :

Wow, more than three months now... you really got a complicated nut to crack there Wink



LOL!

I just realized your reply is number "100"

I'll close this deal if it's the last thing I do.

And it very well may be Undecided
Back to top
 
Quantum3D AAlchemy 3 Channel SwapLock/SyncLock System.  Powered by VSA 100 GPUs Running in SLI Mode. 3dfx at it's Best......
gamma742 https://www.facebook.com/bob.waller  
IP Logged
 
TM30
God Member
*****
Offline



Posts: 1108
Germany
Gender: male
Re: [S] Mercury I/O Cable
Reply #102 - 13.12.05 at 02:03:16  
gamma you know, i will not fool you.

you know the deal (brooklyn bounce is for real...) [lol last one  went into my mind, sorry, forget about it Wink ]
Back to top
« Last Edit: 13.12.05 at 02:03:33 by TM30 »  
 
IP Logged
 
TM30
God Member
*****
Offline



Posts: 1108
Germany
Gender: male
Re: [S] Mercury I/O Cable ** Sale Pending**
Reply #103 - 16.12.05 at 22:17:03  
gamma, today i bought a third L440gx+ board cause the seller of the second board doesnt respond anymore  Cry no contact, no noard, nothing  Angry

i hope than your image will work.
Back to top
« Last Edit: 16.12.05 at 22:17:18 by TM30 »  
 
IP Logged
 
gdonovan
YaBB Administrator
*****
Offline


Infernal Collector

Posts: 2361
Re: [S] Mercury I/O Cable ** Sale Pending**
Reply #104 - 16.12.05 at 22:45:36  
Quote:
gamma, today i bought a third L440gx+ board cause the seller of the second board doesnt respond anymore  Cry no contact, no noard, nothing  Angry


Sheesh, would have been cheaper to buy my known good spare board.
Back to top
 
Rampage is alive!
 
IP Logged
 
Pages: 1 ... 5 6 7 8 9 10
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

3dfx Archive » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge