Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Need help getting an AA5 to work (Read 375 times)
Queso
YaBB Newbies
*
Offline


Cheezy 3dfx noob!

Posts: 33
Need help getting an AA5 to work
10.05.15 at 22:41:08
 
Hey everyone,
I've been collecting parts to make my own Aalchemy system. So far, it's been a pain to get the damn thing running right, but I got as far as getting the properties tab to show in windows xp. I'm glad that the psu and the card works seems to work fine, but I can't run the test. It gives me this error:
"LoadLibrary failed for file C:\windows\system32\obsidian2\glide3xr.dll: the specified module could not be found."

I'm a little new to this...but could someone please help point me into the right direction? thanks!
Back to top
 

Slowly starting my collection...
 
IP Logged
 
bucksavage
Full Member
***
Offline


Voodoo rocks!

Posts: 222
Ontario, Canada
Gender: male
Re: Need help getting an AA5 to work
Reply #1 - 11.05.15 at 04:58:52
 
Queso wrote on 10.05.15 at 22:41:08:
Hey everyone,
I've been collecting parts to make my own Aalchemy system. So far, it's been a pain to get the damn thing running right, but I got as far as getting the properties tab to show in windows xp. I'm glad that the psu and the card works seems to work fine, but I can't run the test. It gives me this error:
"LoadLibrary failed for file C:\windows\system32\obsidian2\glide3xr.dll: the specified module could not be found."

I'm a little new to this...but could someone please help point me into the right direction? thanks!



Sounds to me like XP is looking for the Glide part of your drivers, and can't find it.  Now, if you installed it, and it can't find it, then that is a major issue.  If you haven't installed them, then it won't work until you do.
Back to top
 

...&&[url=http://ubanimator.com][img]http://img181.imageshack.us/img181/9504/userbar3130167aj.gif[/
 
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: Need help getting an AA5 to work
Reply #2 - 11.05.15 at 06:44:20
 
Install the latest AAlchemy display driver via WinXP device Manager, apply my registry fix to get the properties tab and you should be good to go.

AA5 V4.6 driver:
http://www.falconfly.de/downloads/Q3D_AA5_Aalchemy-v46.zip

Registry fix for XP:
http://www.falconfly.de/downloads/AA5_XP_Patch.rar
Back to top
 
 
IP Logged
 
Queso
YaBB Newbies
*
Offline


Cheezy 3dfx noob!

Posts: 33
Re: Need help getting an AA5 to work
Reply #3 - 13.05.15 at 21:32:25
 
Hmm...I do have the latest driver installed along with the registry fix. I also installed opengvs,  and the same error shows when trying to run a benchmark.

Could it be possible that the problem comes from using a voodoo 5 as a primary display adapter? This motherboard doesn't like my geforce cards, so this is the only agp card that works.
Back to top
 

Slowly starting my collection...
 
IP Logged
 
Loeschzwerg
Senior Member
****
Offline


AAlchemy PSU maker :-)

Posts: 396
Germany -> Bavaria -> Augsburg
Gender: male
Re: Need help getting an AA5 to work
Reply #4 - 15.05.15 at 06:46:41
 
This could be the case, yes. You should try a different primary card.
Back to top
 
 
IP Logged
 
Queso
YaBB Newbies
*
Offline


Cheezy 3dfx noob!

Posts: 33
Re: Need help getting an AA5 to work
Reply #5 - 04.06.15 at 06:03:37
 
Update: I finally got it to work! I'm using a matrox card and the same model motherboard but different physical board. I think the first one was causing me problems.  Cheesy
Back to top
« Last Edit: 04.06.15 at 06:06:21 by Queso »  

Slowly starting my collection...
 
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: Need help getting an AA5 to work
Reply #6 - 04.06.15 at 19:12:26
 
Just a note...never mix different 3dfx cards in a system, it won't know what card  to use since they all use glide Smiley

Was the same when using a voodoo3 + voodoo2 SLI......never worked
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
RCF
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 5
Gender: male
Re: Need help getting an AA5 to work
Reply #7 - 05.06.15 at 21:58:54
 
ultima
In the past, I have mixed 3dfx cards in the same system. V5 with V1 and V5 with V2. The glide version are different between this cards. There's a simple utility to switching the Glide files in the Windows system folder.
Back to top
 
 
IP Logged
 
ultima
God Member
*****
Offline


Always searching

Posts: 876
The Netherlands
Gender: male
Re: Need help getting an AA5 to work
Reply #8 - 05.06.15 at 23:17:43
 
Seriously?? I never knew that....do you have a link for it?
Back to top
 

3DFX Playrig:

Aerocool Strike-X Air
SuperMicro H8DAE
Dual Opteron 280 @ 2.4Ghz (4 cores)
4 x 1GB PC3200
3DFX Voodoo5 5500MAC PCI
WD 160GB ATA100/133
Diamond MonsterSound MX300
Windows2000 SP4
 
IP Logged
 
Queso
YaBB Newbies
*
Offline


Cheezy 3dfx noob!

Posts: 33
Re: Need help getting an AA5 to work
Reply #9 - 06.06.15 at 05:06:18
 
well then, I guess I learned that the hard way. lol.
That switching utility would be nice though!
Back to top
 

Slowly starting my collection...
 
IP Logged
 
RCF
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 5
Gender: male
Re: Need help getting an AA5 to work
Reply #10 - 06.06.15 at 05:29:55
 
...

To install, just take a look at the readme file.

https://mega.nz/#!nxoUGLSC!2V_8PHt3K4RjvzloS1eTpHf4DQ_tLLmPz6en2q1veCE
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print