Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
Voodoo Graphics 6MB at resolution 800x600 (Read 296 times)
VooDooMan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 22
Voodoo Graphics 6MB at resolution 800x600
13.02.15 at 11:42:03
 
I am trying to run my Voodoo Graphics 6MB (Miro Hiscore 3D) to run at resolution 800x600.
I know that in order to be able to do that the card would have to have 4 MB of memory for frame-buffer, or I would have to run it on a aplication with the z-buffer disabled
...

The problem is that my card has probably 4MB for textures and 2 MB for frame buffer, just like Conpous Pure 3D:
...

My questions is:
Is it ALWAYS the case that 6MB of memory is dividied in the same way on Voodoo 1 cards (2MB - frame buffer, 4MB - textures?)


On this video https://www.youtube.com/watch?v=gxsYJcNex5E we can see Innovision Mighty FX6 with 6MB of ram runnig Quake2 at 800x600... so maybe this board has some other division of memory?

The case with the 8 MB version (Skywell Magic 3D PLUS for example) seems simple:
It has 4MB for textures and 4MB for frame-buffer thus it ALWAYS support 800x600. right?
Back to top
 
WWW https://www.facebook.com/RetroGraphicsCards/photos  
IP Logged
 
Thandor
Full Member
***
Offline


What's the fuzz all about?

Posts: 226
Re: Voodoo Graphics 6MB at resolution 800x600
Reply #1 - 13.02.15 at 11:56:18
 
I'm not sure about normal Voodoo 6MB cards, never thought about the possibility that the memory configuration could be different.

The Quantum3D Obsidian SB50-2220 has 6MB with a 2MB, 2MB, 2MB configuration. The extra 2MB is due the extra TMU on the Amethyst add-on board.

The Quantum3D Obsidian SB50-4220 has 8MB with a 4MB, 2MB, 2MB configuratin. Again the extra 2MB because of the extra TMU, but now with 4MB FBI rather than 4MB per TMU. I did 800x600 benchmarks with this card, so 800x600 runs fine if you have 4MB FBI.
Back to top
 
WWW  
IP Logged
 
VooDooMan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 22
Re: Voodoo Graphics 6MB at resolution 800x600
Reply #2 - 13.02.15 at 12:57:48
 
Thandor wrote on 13.02.15 at 11:56:18:
I'm not sure about normal Voodoo 6MB cards, never thought about the possibility that the memory configuration could be different.


So how do you explain that video with Mighty FX6? 

Thandor wrote on 13.02.15 at 11:56:18:
The Quantum3D Obsidian SB50-2220 has 6MB with a 2MB, 2MB, 2MB configuration. The extra 2MB is due the extra TMU on the Amethyst add-on board.

The Quantum3D Obsidian SB50-4220 has 8MB with a 4MB, 2MB, 2MB configuratin. Again the extra 2MB because of the extra TMU, but now with 4MB FBI rather than 4MB per TMU. I did 800x600 benchmarks with this card, so 800x600 runs fine if you have 4MB FBI.


OK, I get it. How about your Skywell Magic 3D PLUS? Does it have 4MB TMU and 4MB FBI?
Back to top
 
WWW https://www.facebook.com/RetroGraphicsCards/photos  
IP Logged
 
Thandor
Full Member
***
Offline


What's the fuzz all about?

Posts: 226
Re: Voodoo Graphics 6MB at resolution 800x600
Reply #3 - 13.02.15 at 16:28:32
 
VooDooMan wrote on 13.02.15 at 12:57:48:
So how do you explain that video with Mighty FX6?
Could it be he is running an 8MB Voodoo Graphics? In the video I can't really make up how many memory chips his card has but it might be more than on this card. Of course chip count doesn't say everything because the chip density may vary.

I haven't tried running Quake II 800x600 on the 6MB card yet, so can't really say if there are special options needed to be turned off or on.

Thandor wrote on 13.02.15 at 11:56:18:
OK, I get it. How about your Skywell Magic 3D PLUS? Does it have 4MB TMU and 4MB FBI?
I would assume it has a 4MB/4MB configuration, but I will check when I benchmark the card.
Back to top
 
WWW  
IP Logged
 
VooDooMan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 22
Re: Voodoo Graphics 6MB at resolution 800x600
Reply #4 - 13.02.15 at 17:35:36
 
Well, I think this is exactly the same card but on green PCB
...

The best thing would be if someone who owns this card checked if Mighty FX6M has 4MB for FBI and 2 for TMU.
Back to top
 
WWW https://www.facebook.com/RetroGraphicsCards/photos  
IP Logged
 
Thandor
Full Member
***
Offline


What's the fuzz all about?

Posts: 226
Re: Voodoo Graphics 6MB at resolution 800x600
Reply #5 - 15.02.15 at 22:29:54
 
Recently I started sorting my collection in boxes and came across a lot of hardware that I haven't added t my on-line database. Guess what; in one of the boxes I found a Mighty FX6M!

After I finished several Banshee-benchmarks I'll get to the Voodoo 1 cards. I hope the Mighty FX6M works because then I can see the memory configuration and test-results myself Smiley.
Back to top
 
WWW  
IP Logged
 
VooDooMan
YaBB Newbies
*
Offline


recent 3dfx enthusiast

Posts: 22
Re: Voodoo Graphics 6MB at resolution 800x600
Reply #6 - 16.02.15 at 08:08:07
 
That's a very very good news Wink I hope the card is just fine, can't wait till you test it Smiley
Back to top
 
WWW https://www.facebook.com/RetroGraphicsCards/photos  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print