Welcome, Guest. Please Login 3dfx Archive
 
  HomeHelpSearchLogin  
 
Pages: 1 2 
Send Topic Print
Asus A7V rev 1.02 problems ???? (Read 698 times)
Leveller
Junior Member
**
Offline


CATZ ROOL

Posts: 98
Scotland
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #15 - 05.03.10 at 23:03:01
 
oldskool wrote on 05.03.10 at 21:30:15:
Why a Duron 1400, it doesn't seem to be supported by your board? Try bios version 1.07 with your cpu's
Check the cpu numbers very carefully some are very similar between bus speed versions 266mhz and 333mhz ect

One of the guys on here Razrx I think it was,yeah,confirmed that this was the fastest my board could run,so I went with it,it initially had a Duron 1200 in it,which,I still have somewhere Smiley
Back to top
 

Duct tape is like the force. It has a light side, and a dark side, used correctly it holds the universe together,used incorrectly,it sticks your cat to the wall
Vandepool  
IP Logged
 
Thandor
Full Member
***
Offline


What's the fuzz all about?

Posts: 226
Re: Asus A7V rev 1.02 problems ????
Reply #16 - 06.03.10 at 00:59:26
 
Maybe you are looking for the Duron 1300? The 1400, 1600 and 1800 models are based on the Applebred-core which is basically a 130nm Thoroughbred-B core with disabled L2-cache. The Duron 1300 is the fastest 'old' Duron on 180nm with a Morgan core.

The Applebred-based CPU's have a 133MHz (DDR266) FSB and the Morgan's run with 100MHz (DDR200).
Back to top
 
WWW  
IP Logged
 
oldskool
Senior Member
****
Offline


I Love 3dfx

Posts: 398
uk
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #17 - 07.03.10 at 19:37:11
 
http://www.cpu-upgrade.com/mb-ASUS/A7V133.html

Have a look at this, has all the chip numbers as well.
Choose one and check elsewhere to confirm it works.
Back to top
 

Epox 8K3A+/AMD 2700/1GB RAM/3dfx 5500 agp/Hercules Prophetview 920
 
IP Logged
 
Leveller
Junior Member
**
Offline


CATZ ROOL

Posts: 98
Scotland
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #18 - 07.03.10 at 21:28:06
 
oldskool wrote on 07.03.10 at 19:37:11:
http://www.cpu-upgrade.com/mb-ASUS/A7V133.html

Have a look at this, has all the chip numbers as well.
Choose one and check elsewhere to confirm it works.

Oh buggar,so that means the Duron 1400 I just bought won't work with it then,BUT,the athlon xp 1800 I have in now will work at it's true speed if I update the BIOS Shocked
Back to top
 

Duct tape is like the force. It has a light side, and a dark side, used correctly it holds the universe together,used incorrectly,it sticks your cat to the wall
Vandepool  
IP Logged
 
oldskool
Senior Member
****
Offline


I Love 3dfx

Posts: 398
uk
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #19 - 07.03.10 at 22:25:04
 
Leveller wrote on 07.03.10 at 21:28:06:
oldskool wrote on 07.03.10 at 19:37:11:
http://www.cpu-upgrade.com/mb-ASUS/A7V133.html

Have a look at this, has all the chip numbers as well.
Choose one and check elsewhere to confirm it works.

Oh buggar,so that means the Duron 1400 I just bought won't work with it then,BUT,the athlon xp 1800 I have in now will work at it's true speed if I update the BIOS Shocked


Only with pcb 1.05 according to the table, I expect the Duron might run but at a lower clock speed  Undecided

Confusing as later revisions support a higher fsb.

I had the same problem determining whether i could stick my voodoo 3 into the agp slot on my a7a266.
Back to top
« Last Edit: 07.03.10 at 22:44:43 by oldskool »  

Epox 8K3A+/AMD 2700/1GB RAM/3dfx 5500 agp/Hercules Prophetview 920
 
IP Logged
 
Leveller
Junior Member
**
Offline


CATZ ROOL

Posts: 98
Scotland
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #20 - 08.03.10 at 00:50:01
 
oldskool wrote on 07.03.10 at 22:25:04:
Leveller wrote on 07.03.10 at 21:28:06:
oldskool wrote on 07.03.10 at 19:37:11:
http://www.cpu-upgrade.com/mb-ASUS/A7V133.html

Have a look at this, has all the chip numbers as well.
Choose one and check elsewhere to confirm it works.

Oh buggar,so that means the Duron 1400 I just bought won't work with it then,BUT,the athlon xp 1800 I have in now will work at it's true speed if I update the BIOS Shocked


Only with pcb 1.05 according to the table, I expect the Duron might run but at a lower clock speed  Undecided

Confusing as later revisions support a higher fsb.

I had the same problem determining whether i could stick my voodoo 3 into the agp slot on my a7a266.

I do have an Athlon not Duron 1200 that will go in  Cheesy
I'll just use that,like I say,it's gonna be used to play old games on,thats it,I don't fancy trying to flash the BIOS in old machines either,I've done it on my main board (ASUS P5n32-sli),but that was dead simple,I wouldn't know DOS from BROS  Grin an I don't have a floppy disk
Thanks everyone on here for your help btw,much appreciated Smiley

Tony
Back to top
 

Duct tape is like the force. It has a light side, and a dark side, used correctly it holds the universe together,used incorrectly,it sticks your cat to the wall
Vandepool  
IP Logged
 
oldskool
Senior Member
****
Offline


I Love 3dfx

Posts: 398
uk
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #21 - 08.03.10 at 16:09:35
 
I did my a7a266 using CD's, boot using win98se to DOS prompt with cd support. Then put in a cd with the flash tools and new bios on.
Back to top
 

Epox 8K3A+/AMD 2700/1GB RAM/3dfx 5500 agp/Hercules Prophetview 920
 
IP Logged
 
Leveller
Junior Member
**
Offline


CATZ ROOL

Posts: 98
Scotland
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #22 - 11.03.10 at 01:19:49
 
I got that AMD Duron 1400 for it today,installed it and it runs at 1050mhz  Grin
I've got a bid in on a Duron 1300 now   Smiley
Back to top
 

Duct tape is like the force. It has a light side, and a dark side, used correctly it holds the universe together,used incorrectly,it sticks your cat to the wall
Vandepool  
IP Logged
 
Maf
Full Member
***
Offline


I Love YaBB 2!

Posts: 106
Re: Asus A7V rev 1.02 problems ????
Reply #23 - 11.03.10 at 09:14:40
 
Leveller wrote on 11.03.10 at 01:19:49:
I got that AMD Duron 1400 for it today,installed it and it runs at 1050mhz  Grin
I've got a bid in on a Duron 1300 now   Smiley

Dude just buy any KT266/KT333 based mobo and your hell will end Smiley
Back to top
 
 
IP Logged
 
Leveller
Junior Member
**
Offline


CATZ ROOL

Posts: 98
Scotland
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #24 - 11.03.10 at 11:43:56
 
Maf wrote on 11.03.10 at 09:14:40:
Leveller wrote on 11.03.10 at 01:19:49:
I got that AMD Duron 1400 for it today,installed it and it runs at 1050mhz  Grin
I've got a bid in on a Duron 1300 now   Smiley

Dude just buy any KT266/KT333 based mobo and your hell will end Smiley

Got it sorted now Maf,made a quick phone call to an old mate back home in Liverpool,he's gonna send me the elusive Duron 1300 up to me  Grin

The hair loss stops here  Grin
Back to top
 

Duct tape is like the force. It has a light side, and a dark side, used correctly it holds the universe together,used incorrectly,it sticks your cat to the wall
Vandepool  
IP Logged
 
Leveller
Junior Member
**
Offline


CATZ ROOL

Posts: 98
Scotland
Gender: male
Re: Asus A7V rev 1.02 problems ????
Reply #25 - 17.03.10 at 13:38:42
 
Well,she's all up and running now,got the Duron 1300 this morning,fitted and working nicely  Smiley,managed to get my original copy of windows 98 working again,amazing what a bit of Brasso can do Wink,I am going to change the soundcard though,got a soundblaster on its way to me now.
I've installed a few games on it,Unreal,wizards and warriors,Vampire Masquerade etc,all running sweet as a nut,happy as a happy thing now Grin
Cheers for all your help in this thread guys,appreciate it

Tony
Back to top
 

Duct tape is like the force. It has a light side, and a dark side, used correctly it holds the universe together,used incorrectly,it sticks your cat to the wall
Vandepool  
IP Logged
 
Pages: 1 2 
Send Topic Print